Post by Gysixxer on Feb 15, 2012 21:26:12 GMT -6
Sup, im new here. But i'd like to share my first build!
Project: Gysixxer
I recieved this scooter on a trade. It was not running, it had been sitting for months. The next day i cleaned the carb & changed the battery and she fired right up. I got to take it on one ride. It had some issues. A few days later, i went to charge the scooter and something bad happened. Still to this day i have issues with the electrical system. But its a work in progress. .
So she sat for a few more months, untill i sold my current scooter at that time. Even though it wasnt running i decided to start building her up. She had 3600 in milage on the odo. From what the original owner told me, by the shop he brought it too. He told me it needed a new piston n rings. So naturally i ordered a 58.5mm 155cc big bore & a10 cam, New Racing Performance CDI, orange coil, Powerlink 842 belt & intake filter.
Still not running, i brought it to my friends house were it sat for another month. Tried swapping cdi, coil, spark and stator. Still no luck. So after nothing getting resolved i brought her home. Frustrated, i contemplated on selling it. But gave it one last shot. Made some changes and BAM. She fired up.
Shortly after i found it had an electrical issue. And with a friend of mine we made a temp fix. More tinkering and modding happen after this....
1. Slammed the front roughly 4in
2. Bought a LOT of parts on another forum, for dirt cheap. $150, got me a ncy variator, ncy drive face, p&p full exhaust, 1500rpm torque spring, ncy dipstick, ncy intake tube, uni 2stage filter & chrome air filter, dr. Pulley sluders and rollers (various sizes), orange cdi (bad), 842 belt (broke on my boys scooter after 20-40miles) and a full jet kit!
3. Mrp main spring kit & chrome oil catch can, custom side mount licence plate off of the cvt cover with led plate lights & a brand new seat!!!
4. 140/60-13 rear tire and slightly used chrome oem adjustable shocks (lowered the rear 1in)
5. Stretched the rear 6-8in (not 100% sure) & ceramic coated my cvt and exhaust.
6. All new fuel lines.
7. Pw:JDM Drag handle bar conversion, black & blue (2 sets) of grips, bar end bike mirrors and cup holder
8. 30mm cvk carb w/ 117.5 rejet & a12 cam (cam not installed yet) forward facing carb with aluminum intake manifold & mounted my intake sticking out of the side of my plastics (sickkkkkkkkk!!!!)
So here is my build, Thanks to Will & Mike @ Performance Kote, Orlando FL. And my boy Lenny for helping me and listening to my endless b/s!!!!
Its not completed. I still have to complete the wiring harness and do the rest of the cosmetic work.
Plan on a vinyl wrap, bkue header wrap (next week) Swapping out the wheels and doing a rear fatty conversion (near future) with an ankle biter cvt cover, some more transmission work. And then she should be comepleted!!!
Thanks for reading!!!
Project: Gysixxer
I recieved this scooter on a trade. It was not running, it had been sitting for months. The next day i cleaned the carb & changed the battery and she fired right up. I got to take it on one ride. It had some issues. A few days later, i went to charge the scooter and something bad happened. Still to this day i have issues with the electrical system. But its a work in progress. .
So she sat for a few more months, untill i sold my current scooter at that time. Even though it wasnt running i decided to start building her up. She had 3600 in milage on the odo. From what the original owner told me, by the shop he brought it too. He told me it needed a new piston n rings. So naturally i ordered a 58.5mm 155cc big bore & a10 cam, New Racing Performance CDI, orange coil, Powerlink 842 belt & intake filter.
Still not running, i brought it to my friends house were it sat for another month. Tried swapping cdi, coil, spark and stator. Still no luck. So after nothing getting resolved i brought her home. Frustrated, i contemplated on selling it. But gave it one last shot. Made some changes and BAM. She fired up.
Shortly after i found it had an electrical issue. And with a friend of mine we made a temp fix. More tinkering and modding happen after this....
1. Slammed the front roughly 4in
2. Bought a LOT of parts on another forum, for dirt cheap. $150, got me a ncy variator, ncy drive face, p&p full exhaust, 1500rpm torque spring, ncy dipstick, ncy intake tube, uni 2stage filter & chrome air filter, dr. Pulley sluders and rollers (various sizes), orange cdi (bad), 842 belt (broke on my boys scooter after 20-40miles) and a full jet kit!
3. Mrp main spring kit & chrome oil catch can, custom side mount licence plate off of the cvt cover with led plate lights & a brand new seat!!!
4. 140/60-13 rear tire and slightly used chrome oem adjustable shocks (lowered the rear 1in)
5. Stretched the rear 6-8in (not 100% sure) & ceramic coated my cvt and exhaust.
6. All new fuel lines.
7. Pw:JDM Drag handle bar conversion, black & blue (2 sets) of grips, bar end bike mirrors and cup holder
8. 30mm cvk carb w/ 117.5 rejet & a12 cam (cam not installed yet) forward facing carb with aluminum intake manifold & mounted my intake sticking out of the side of my plastics (sickkkkkkkkk!!!!)
So here is my build, Thanks to Will & Mike @ Performance Kote, Orlando FL. And my boy Lenny for helping me and listening to my endless b/s!!!!
Its not completed. I still have to complete the wiring harness and do the rest of the cosmetic work.
Plan on a vinyl wrap, bkue header wrap (next week) Swapping out the wheels and doing a rear fatty conversion (near future) with an ankle biter cvt cover, some more transmission work. And then she should be comepleted!!!
Thanks for reading!!!
Attachments:
lol
Where did you get your intake tubes at? I'm having problems with the crossbar getting in my way and I wanted to bring it under and out to the side.