Clinician
Currently Offline
Posts: 1 
Likes: 0
Joined: Jul 12, 2014 13:06:21 GMT -6
|
Post by jacobp on Jul 12, 2014 13:10:29 GMT -6
I recently had to replace the engine on my 2010 BMS heritage 150 due to an accident. I am having problems getting it started. I have most of the vacuum lines in place but I am lost on where the rest of them need to go. Please help. I have been unable to find any pictures that show where the lines go to.
|
|
|
|
Post by cyborg on Jul 12, 2014 13:27:51 GMT -6
posting pic from you would go along way to helping find where hey go
|
|
|
|
Post by Alleyoop on Jul 12, 2014 13:28:49 GMT -6
Take a picture of the carb area and hoses and any emissions and Canisters that may be on that scoot.
They put on different emissions on scoots and different emissions go to different things.
If you have questions of different hoses point them out and WHERE they are coming from is the IMPORTANT thing to know so that we can tell you where they go.
Alleyoop
|
|
|
|
Post by Bashan on Jul 12, 2014 20:05:56 GMT -6
Did you look in the Library under Air Fuel & Carb? There's an article called "where do all the hoses go?" That might help. 
|
|
..BAD TO THE BONE..
