Throttle By kalee (Read 1,227 times)

[kalee]

Alley, have you ever had the throttle cable apart on your 150cc ? My neighbor here in the park ask me to take her trike for a ride and it has sit for quite some time but I did get it started. But the throttle seems to be froze and I'm not sure what or how to take it apart or what to look for. Shaft on carburator still move's so I'm pretty sure its in the cable. ( She has had problems with the throttle before and some one else worked on it )

kalee

[Alleyoop]

The Cable my have a bad bend and that will bind them, they start to cut into the sheave inside and bind. So I would check for that first before taking it off.

You have to take it off at the Throttle grip, under the switch are two screws take those off and the switch comes apart in two parts. You will see the Cable end lead ball hooked onto a wheel with a slot. Take the lead ball out of the slot and unhook the cable from the switch. Get some WD-40 and squirt the stuff down in there and put a rag under it by the carb or you can also take it off there as well and let it hang down to the ground so the stuff comes out and work the cable back and forth with your hand.

[kalee]

Alley Thanks for the info. I'm going to try and get it in my garage tommorow where my tools are , so I dont have to pack them back an forth, I will let you know what I find . Can you tell me how I got to be a scooter doc, I'm no professional.

kalee

[Alleyoop]

Rich hands out the names on the forum so he just thought of you as a DOC(HEHE).
Alleyoop

[kalee]

Aug 2, 2014 18:17:04 GMT -6 Alleyoop said:

Rich hands out the names on the forum so he just thought of you as a DOC(HEHE).
Alleyoop

That would be okay if could remember what I had told some one to do to there bike, I have a hard time remembering what I have done to my own bike.anyway ( Thanks Rich )

kalee

[kalee]

Alley, I tore into the throttle on the handle bars today ( no kinks in cable )couldnt move the cable so I started putting penetrating oil down the sheave. About a half hour later I could move the cable inside the sheave now its working okay. Down here in south Tx. you dont dare leave anything sitting outside or its going to rust. Now she has another problem no front brake, there is fluid in the reservoir so I tried bleeding the front brake but didnt do any good.

You probably dont remember but this is the trike I told you about a year ago this lady bought this bike thinking it was a 250cc and the mehcanic that works on it for her told me it was a 150cc. WELL guess what here is the model# ZH-300Za & serial# L37LMPFV1AZ010036, this was on a plate mounted to the frame. Back tires are 235/30-12.. I'm thinking this is a 300cc and its a 2010 with reverse. What do you think? I'm going to have to break down an buy a lift ramp to be able to work on these trikes, getting to old to get up an down, getting down isnt the problem its getting back up.
I would sure like to have the differential thats in this trike, its all inclosed like a car differential.
This trike has a radiator on it but I can not find the fill cap any Idea's ?

kalee

[Alleyoop]

Yea its a 300 trike :
Alleyoop



Does the Differential look like this:

[kalee]

Aug 3, 2014 15:00:57 GMT -6 Alleyoop said:

Yea its a 300 trike :
Alleyoop



Does the Differential look like this:

Yes it does look like this.Is the hand control for the brake rebuildable it acts like there is no pressure coming out of the hand control.This trike is only showing 1057 miles but sure is ruff, must not be right or its been sitting outside even before this lady bought it. It seems to be loading up on gas, do I need to adjust the carb? dont look like its ever been done.
kalee

[Alleyoop]

Check the brake reservoir window it may be low on brake fluid if so take the cover off and fill it so it looks like there is a little bubble on the top of the window. Then SLOWLY SQUEEZE THE BRAKE to get air out of it. It will shot up some so DO IT SLOWLY otherwise it will squirt all over the place and as you do this you will start to notice pressure coming back.
Alleyoop

[kalee]

Aug 3, 2014 15:44:41 GMT -6 Alleyoop said:

Check the brake reservoir window it may be low on brake fluid if so take the cover off and fill it so it looks like there is a little bubble on the top of the window. Then SLOWLY SQUEEZE THE BRAKE to get air out of it. It will shot up some so DO IT SLOWLY otherwise it will squirt all over the place and as you do this you will start to notice pressure coming back.
Alleyoop

Okay Thanks Alley I will try that

kalee

[kalee]

Where is the radiator fill cap on this trike? I have looked at everything and can not find it.

kalee

[Alleyoop]

It is under the front nose here is how to get at it:
Alleyoop

scooterdoc.proboards.com/thread/2252/sample-manua

[kalee]

Aug 3, 2014 20:18:30 GMT -6 Alleyoop said:

It is under the front nose here is how to get at it:
Alleyoop

scooterdoc.proboards.com/thread/2252/sample-manua

Thanks Alley, What a H of a place for the radiator cap why didnt they extend it out thru the storage box. This is plumb dumb

kalee

[Alleyoop]

HAHAHAHA, I know, but they did not call you or me when they designed them

[kalee]

Aug 3, 2014 21:12:14 GMT -6 Alleyoop said:

HAHAHAHA, I know, but they did not call you or me when they designed them

I mentioned about six quotes before that it is loading up on gas ( not bad ), I'm thinking maybe I need to check the air filter and looks like I have to remove the whole rear section to get at it. Gives me something to do I guess. To hot to work on it today maybe tomorow.

Thanks Alley for all your info
kalee