Headlight wiring connector By falstaff (Read 1,546 times)

[falstaff]

Does anyone have a source for the 4 pin headlight wiring connector that plugs into the switch, on the handle bars, on a 2008 Roketa Bali Mc-13-150? Can these be sourced locally? Don't want to have to buy a whole new harness. Thank you.

[richardv]

Try this place;

www.cycleterminal.com/index.html

[Guitarman]

Or this one:

Wire Connector Kit

[falstaff]

Looked through both of the above mentioned sites and did not see the connector I am looking for. I may need to just go to rat shack and see what they have.

[dmartin95]

Nov 19, 2014 13:44:21 GMT -6 falstaff said:

Does anyone have a source for the 4 pin headlight wiring connector that plugs into the switch, on the handle bars, on a 2008 Roketa Bali Mc-13-150? Can these be sourced locally? Don't want to have to buy a whole new harness. Thank you.

 Can you post a pic of the plug you need? 

[falstaff]

Here is a link to the switch I have. There is a view of the connector.

www.chinesepartswholesale.com/product_info.php?products_id=66272

[Guitarman]

You can just create your own connector for that with the kit I sent you to. It does not have to be a single plug. You can do it with individual connectors and then just zip tie them together. Pow, Done.

[richardv]

I have done several like that in old cars. Then number the individual wires to match the old plug. Most times all that was needed was to remove the wires from the plug, tighten the grip of the fitting and install on the appropriate pin on the switch.

[tvnacman]

how about I remove it from a harness that I have been picking parts off of already ? How long did you want the tail ?

John

[richardv]

If you can get one long enough to reach the next connection that would be ideal. If not try to get it long enough to reach an area that would be protected from the weather and preferably where it could be secured so that it didn't flex. If those can not be achieved I like 3 inches as a minimum. Less is more difficult to work with.

[tvnacman]

That plug is not part of the main harness , it is part of the headlight harness . I do not have that plug .

John

[falstaff]

Yeah, I am thinking I need to make my own as has been suggested. Thank you for all the awesome replies. You guys are tops.

[Bashan]

What does the switch do? Does it just turn on the lights? Or does it turn on the parking lights too? Tell us what the switch does and it's a simple matter to crimp some spade connectors on to the wires and plug them onto the switch.

[falstaff]

All it does is switch between hi and/or lo beams. The lights are on all the time anyway.