Clinician
Currently Offline
Posts: 1
Likes: 0
Joined: Jul 31, 2015 16:31:45 GMT -6
|
Post by interceptor13 on Jul 31, 2015 16:53:27 GMT -6
I recently picked up a 2013 SSR Interceptor 150 from a friend who had attempted two things: install an aftermarket exhaust and an aftermarket cold air intake, both of which failed.
One the exhaust studs going into the cylinder head was snapped and the other is bent.
IN attempting to install the cold air intake, my friend took apart all of the vacuum and intake hose routing for the emissions and fuel delivery. I have no idea how it go back together.
Basically I need help figuring the routing for all the intake/vacuum hoses and where to purchase parts for this bad boy.
I will post some pictures later of what I have and am looking at. Thanks for the help.
|
|
|
Post by Alleyoop on Jul 31, 2015 19:02:32 GMT -6
|
|