jet sizes ice bear viking | Scooter Doc Forum

Certified Clinician

Currently Offline

Posts: 57

Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6

jet sizes ice bear viking by: billtrek - Dec 10, 2015 19:15:12 GMT -6

Reply Quote

Post by billtrek on Dec 10, 2015 19:15:12 GMT -6

Hi Guy's Finally cut the screw heads off on my stock carb and replaced with allen head screws. I want to upsize my jets.
They are marked JR35 and JR104. No idea what the JR stands for. I've upgraded the exhaust to the performance exhaust that NYC scooter parts sells. And have the UNI pod filter connected directly to the carb. Would like an idea of where I should start on jet sizes.

Forum Admin

Currently Offline

Posts: 13,815
Likes: 457
Joined: Mar 30, 2010 22:06:05 GMT -6

jet sizes ice bear viking by: Alleyoop - Dec 10, 2015 20:06:01 GMT -6

Reply Quote

Post by Alleyoop on Dec 10, 2015 20:06:01 GMT -6

The pilot jet is the #35 and the #104 is your main jet. Leave the pilot jet alone the #35 is good enough you only need to change the main jet get a #110 and a #112 try the #112 first if to much go down to the #110.
Alley

..BAD TO THE BONE..

PST150H 62mm BBK, 60mm Crank, 16/37 Tranny Gears............................................... MOW-POWER

FROM THE BOOK OF KNOWLEDGE:
THE THINGS YOU DO FOR YOURSELF ARE GONE WHEN YOU DIE, BUT THE THINGS YOU DO FOR OTHERS REMAIN AS YOUR LEGACY.

billtrek PM billtrek billtrek's Posts billtrek's Threads Certified Clinician Currently Offline Posts: 57 Likes: 0 Joined: Sept 1, 2014 9:57:26 GMT -6	jet sizes ice bear viking by: billtrek - Dec 10, 2015 21:20:53 GMT -6 Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by billtrek on Dec 10, 2015 21:20:53 GMT -6 Thanks Alleyoop.

jet sizes ice bear viking By billtrek (Read 401 times)

Post by billtrek on Dec 10, 2015 19:15:12 GMT -6

Post by Alleyoop on Dec 10, 2015 20:06:01 GMT -6

Post by billtrek on Dec 10, 2015 21:20:53 GMT -6

Shoutbox