Senior Clinician
Currently Offline
Posts: 193 
Likes: 1
Joined: Dec 7, 2015 12:58:12 GMT -6
|
Post by bob123456789 on Apr 24, 2016 18:56:35 GMT -6
I now need some help with two issues:
1) Whenever I stop using my brakes my engine dies rather than idling and I need to start it again. How do I get it to idle through a stop?
2) My right brake lever (front) has too much free play won't grab.
Thanks again sharing from those years of scooter wisdom. |
|
|
|
Post by Alleyoop on Apr 27, 2016 13:28:24 GMT -6
Sorry I missed this BOB, is this still a problem?
Alleyoop
|
|
Senior Clinician
Currently Offline
Posts: 193
Likes: 1
Joined: Dec 7, 2015 12:58:12 GMT -6
|
Post by bob123456789 on Apr 27, 2016 17:47:30 GMT -6
Yes, but I don't need to fix these things until I can start it.
|
|
|
|
Post by Alleyoop on Apr 28, 2016 11:46:37 GMT -6
Braking and dieing to me it means the rear wheel is spinning when on the center stand which means the IDLE is to high. So braking coming to a stop the motor is trying to turn the wheel and it is to much load and it dies at low rpms.
Easy FIX. After it is warm idling for 5 minutes on the center stand LOWER THE IDLE so the rear wheel stops spinning.
Alleyoop
|
|
Senior Clinician
Currently Offline
Posts: 193
Likes: 1
Joined: Dec 7, 2015 12:58:12 GMT -6
|
Post by bob123456789 on Apr 28, 2016 16:20:34 GMT -6
I hope it is an easy fix. I'll give it a shot once the starter is working.
How difficult is the screw to get to?
Would you be able to point me to a picture of the carb so I can see where the screw is?
|
|
|
|
Post by Alleyoop on Apr 28, 2016 16:35:26 GMT -6
Here you go, Turning the Idle Speed screw Counter Clockwise Lowers the Idle Alleyoop  |
|
..BAD TO THE BONE..