Clinician
Currently Offline
Posts: 23
Likes: 0
Joined: Feb 10, 2018 17:57:01 GMT -6
|
Post by grrbrts on Aug 25, 2018 10:45:08 GMT -6
I bought a carburetor kit for my PD24J carburetor. Does anyone know exactly where the rubber seals are placed?
|
|
|
|
Post by cyborg on Aug 26, 2018 9:21:07 GMT -6
Please show a pic of the kit laid out
|
|
Clinician
Currently Offline
Posts: 23
Likes: 0
Joined: Feb 10, 2018 17:57:01 GMT -6
|
Post by grrbrts on Sept 16, 2018 13:52:52 GMT -6
This is a layout [image] of the kit...  cyborg |
|
|
|
Post by cyborg on Sept 18, 2018 6:46:57 GMT -6
PRETTY MUCH SELF EXPLANITORY,,,THE LARGE SQUARE ONE IS FOR THE FUEL BOWL ,,THE DIAPHRAGM WITH THE SLIDE GOES IN THE TOP OF THE CARB,,DONT FORGET TO TAKE THE NEEDLE OUT OF THE ORIGINAL AND PLACE IT IN THE NEW ONE,,THE WEIRD TRIPLE O RING IS FOR THE ENRICHNER ,,THE OTHER LITTLE DIAPHRAGM IS FOR AN EXCELLERATOR PUMP IF YOU HAVE ONE,,ONE SMALLER O RING IS FOR THE MAIN JET NEEDLE AND THE OTHER IS THE FUEL FLOAT NEEDLE SEAT
|
|
Clinician
Currently Offline
Posts: 23
Likes: 0
Joined: Feb 10, 2018 17:57:01 GMT -6
|
Post by grrbrts on Aug 25, 2019 11:12:57 GMT -6
Can you draw an arrow from each of the three O-rings to their respective placement?
|
|
|
|
Post by cyborg on Aug 29, 2019 6:52:51 GMT -6
I'm afraid not,,I'm a decent troubleshooting Mac,,,,computers not so much
|
|
