2005 125 DAELIM POOR STARTING By chekingese (Read 4,878 times)

[chekingese]

I just realized that I'm talking to the same people on two different forums. Which one should I stay with, And I'll stay off the other. Sorry I was desperate and clutching at straws. for help.

[chekingese]

to BCGREATNESS, I too am in sunny florida! Larry

[Alleyoop]

Checkingese,
Many are on more than one forum so do not feel bad. Many also post their problems on the different forums to get help. I do not think any of the forums will stop helping ANYONE because of mutliple forum posts. Sometimes on one forum a person that knows the answer or that can help more IS NOT on one of the other forums you posted. So it is ok to do that and if you get your issue resolved on one of the forums it is just considerate to post the resolution on the other forum you were also asking for help as well. After all, the forums are here to help the people with their scooter problems and some chit-chat as well and to have some fun.
my .02
Alleyoop

[Bashan]

Jan 18, 2012 21:18:33 GMT -6 chekingese said:

I just realized that I'm talking to the same people on two different forums.

[/b][/quote]
There's another forum!?

You might also want to check the two grounds coming out of the four plug. If that pulse generator isn't grounded securely it can cause a ton of problems. Rich

[imnts2]

Have you done a compression check?

Cheers
lefty2

[bcgreatness]

thanks alley for the picture! most people just use gasket sealer and clog up the holes, i prefer the gasket method because if you decide you want it back or actually need it back, you can just remove the gasket and bolt it back on without having to worry about peeling off glue and fighting to get the glue out of the small holes. like i said, these are virtually useless at sea level and in the warm florida climate. if you do decide to go on a " spectacular journey " out of state to a cold state or a state with a higher elevation then sea level, i would put my enricher back on. thanks again alley!