Post by Bashan on Aug 16, 2014 21:51:12 GMT -6
Oh! That two and four plug come out of there. There's a little clip that you have to use a micro screwdriver on.
Pop that out of there and then you can see the little pins in there when you pull the wires off, make sure they're intact. Those are really small connectors on the wires but I find them at auto weinie. Once they're secure you have to make sure they are hooked up correctly. Here's where they run:
That red/black wire, does it run to the stator or the key? Unhook your killwire and see if anything good happens. That coil feed has to be secure and the trigger does also. Do you have a multi? We'll need to check some voltages.
Pop that out of there and then you can see the little pins in there when you pull the wires off, make sure they're intact. Those are really small connectors on the wires but I find them at auto weinie. Once they're secure you have to make sure they are hooked up correctly. Here's where they run:
That red/black wire, does it run to the stator or the key? Unhook your killwire and see if anything good happens. That coil feed has to be secure and the trigger does also. Do you have a multi? We'll need to check some voltages.
