|
|
Post by olivertwisted on Feb 29, 2016 20:39:41 GMT -6
Ok, my head is just spinning in circles. Forgive me but, I don't think I am ever going to be able to understand the circuit, Alley. My brain itself, short circuits every time I try to conceptualize this . I'm really, really trying but, it's always been that way with me and electrical circuits, my mind goes useless. You go to all this time and trouble to help me understand it but, it's wasted in the electrical circuits area of my peanut! LOL! Following directions is about all I'm good for, here.
So, am I still splicing the green wire across from the B/W (In the connector opposite it, the one that your illustration indicates is the ground for the start button) to a frame ground, then checking for spark in only the run position of the kill switch ?
|
|
|
|
Post by olivertwisted on Feb 29, 2016 20:46:21 GMT -6
Ok, just saw your last post after posting mine. I'll do that, put it all back to stock. No manual grounds, and post results.
|
|
|
|
Post by Alleyoop on Feb 29, 2016 20:47:19 GMT -6
DO IT "ONLY" if the push button DOES NOTHING with you flick the KILLSWITCH TO RUN.
1. SO first flick the killswitch to run and push the start button.
a. IF IT DOES NOTHING then splice the green wire to frame and see if it turns the motor over.
|
|
|
|
Post by olivertwisted on Feb 29, 2016 20:51:49 GMT -6
Ok. Did that , all wired as originally , kill switch to "Run", and nothing there at all.
|
|
|
|
Post by olivertwisted on Feb 29, 2016 20:55:05 GMT -6
But it DOES turn with the killswitch to "Kill".
|
|
|
|
Post by Alleyoop on Feb 29, 2016 21:01:26 GMT -6
WHAT!! test for spark with the killswitch to KILL. If no spark then do this:
splice the GREEN wire next to the GREEN?WHITE wire from the start button and go to ground and
Flick the switch to RUN and see if it turns the motor, if it does test for spark.
|
|
|
|
Post by Alleyoop on Feb 29, 2016 21:21:41 GMT -6
Ok I have been steading the switchs and it appears the switch with the BLACK/WHITE and Green is backward pull that one out and turn it so the BLACK/WHITE is on the outside right now the GREEN is on the outside.
I compared the new ones to the OLD ONES with the spiders on them (HEHE) an you will notice how they are plugged into the killswitch.
|
|
|
|
Post by olivertwisted on Feb 29, 2016 21:25:05 GMT -6
Ok, everything wired to "stock", killswitch to "Kill" , I get spark.
|
|
|
|
Post by Alleyoop on Feb 29, 2016 21:30:23 GMT -6
The killswitch wire plug is backwards in the slot flip it. Ok I have been steading the switchs and it appears the switch with the BLACK/WHITE and Green is backward pull that one out and turn it so the BLACK/WHITE is on the outside right now the GREEN is on the outside. I compared the new ones to the OLD ONES with the spiders on them (HEHE) an you will notice how they are plugged into the killswitch. |
|
|
|
Post by olivertwisted on Feb 29, 2016 21:30:27 GMT -6
REALLY?! I have looked at the over and over and over again LOOKING for a backward one. I trust what you know, rather than my eye so, here goes....
Okay, I did that and now it still does nothing in the "Run" position though.
|
|
|
|
Post by olivertwisted on Feb 29, 2016 21:32:42 GMT -6
If you look at the "Spidery" pic, the G/W and B/W are on opposite ends from each other. Right now, "Flipped" they are on the same end . No bueno
|
|
|
|
Post by Alleyoop on Feb 29, 2016 21:38:23 GMT -6
DANG but look at the actual wires see the B/W on the SPIDY is on the outside and the green on the inside. On the new one the B/W was on the inside and the green on the outside that is why I said to flip it. OK maybe the switch is backwards set it back up to kill and you have spark. what happens if you put it on RUN do you still have spark and does it turn the motor over?
MY BRAIN IS STARTING TO MELT (HAHA).
|
|
|
|
Post by olivertwisted on Feb 29, 2016 21:49:12 GMT -6
Yeah... we weren't gonna be that lucky! Unfortunately, they are sitting in there correctly. It's hatd to tell through the dirt but, I have the thing in front of me to turn it around in my hand and see the spaces. You dont have that luxury  Also, in the NEW pic, that wire running to the left is a grey and blue striped wire that isnt connected to it but is one of the ground wires I ran to tap into. Okay, I'll try the above and post back. By the way, about your brain melting.... Mine was mush when we began this. You poor fella, dealin' with ME!! |
|
|
|
Post by olivertwisted on Feb 29, 2016 21:53:40 GMT -6
DANG but look at the actual wires see the B/W on the SPIDY is on the outside and the green on the inside. On the new one the B/W was on the inside and the green on the outside that is why I said to flip it. OK maybe the switch is backwards set it back up to kill and you have spark. what happens if you put it on RUN do you still have spark and does it turn the motor over? MY BRAIN IS STARTING TO MELT (HAHA). No. I still get nothing. No solenoid. |
|
|
|
Post by Alleyoop on Feb 29, 2016 21:58:07 GMT -6
OK now splice a ground on the green wire next to the GREEN/WHITE and see if you have SOLENOID.
IF YOU have solenoid then with the KILLSWITCH on RUN see if you have spark.
|
|
..BAD TO THE BONE..
Also, in the NEW pic, that wire running to the left is a grey and blue striped wire that isnt connected to it but is one of the ground wires I ran to tap into.