special tool & kevlar belt question installing big bore kit By danny (Read 471 times)

[danny]

I am installing a big bore kit and have a couple questions. Will I need any special tools and is it necessary to install a kevlar belt when you install a big bore kit? If so, which one on ebay would I need for my
2014 Taotao Baccio Retro 49cc to 100cc big bore kit
so I can order one from USA 

[cyborg]

Is this s "drop in kit"? Or do the cases need to be bored out to a accommodate the larger barrel?

[danny]

Nothing was mentioned. Here is what I ordered
www.ebay.com/itm/161394155418?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[cyborg]

Just read the listing,, it's not in the text

[danny]

Thank you

[danny]

ne1?

[dozer187]

Its a 50mm top end kit so no boring should be required on the bottom end, i would recommend a kevlar belt to deal with the added power. I know the bbk i got for my 50 came with 9g rollers. U may want to get a ring compressor, i know some bbk have the bottom of the jug machined with a slight slope to push the rings in as you slide the cylinder down on the piston, most do not though

[danny]

Thanks! whats a fairly priced kevlar belt on ebay for this model engine and a link please?

[dozer187]

m.ebay.com/itm/KEVLAR-DRIVE-BELT-669-18-30-GY6-4STROKE-SCOOTER-50cc-TAOTAO-PEACE-VESPA-JONWAY-/111695146207?hash=item1a018cacdf%3Ag%3AsBIAAOSw~ZdVgMLy&_trkparms=pageci%253Ab5c86ddd-5371-11e6-98c4-74dbd1800bbd%257Cparentrq%253A28f35c4c1560a2a3e5f99d36fffdafa1%257Ciid%253A1

[danny]

The carb came with 3 jets in a bag but im not sure if one is even in the carb already or not. The 3 jets they included in a bag were #85, #90, #95. Any idea What would be the best jet size # for South Florida? 

[danny]

NE1?

[cyborg]

Very big swings in jetting depends on intake ( filter) & exhaust ,,, I take it your 4-500 ft above sea level

[danny]

Here in Hollywood Florida, elevation is 10ft

[jct842]

Hollywood Florida, elevation is 10ft

sunami bait!