Clinician
Currently Offline
Posts: 1
Likes: 0
Joined: Jun 17, 2020 23:21:25 GMT -6
|
Post by rsbj on Jun 17, 2020 23:28:28 GMT -6
Hello ladies and gents, looking for some advice on where to start the jetting on a 18mm carb for the following Gy6 50mm "big" bore kit (82cc) Stock exhaust stock intake (no K&N type filter) Higher(er) compression - about 1.35 points higher due to head and block milling. Some light port and valve work Live in Pittsburgh, so 1,100 feet elevation and ~80 degrees
Thank you!! Rick
|
|