Certified Clinician
Currently Offline
Posts: 72
Likes: 0
Joined: Jul 8, 2011 8:04:14 GMT -6
|
Post by deanc on Jul 20, 2011 20:30:06 GMT -6
Does anyone know where to find the bulb for the gauges on a roketa mc-54-250b, the speedo light is burned out.
|
|
|
Post by Alleyoop on Jul 20, 2011 20:45:35 GMT -6
|
|
Certified Clinician
Currently Offline
Posts: 72
Likes: 0
Joined: Jul 8, 2011 8:04:14 GMT -6
|
Post by deanc on Jul 20, 2011 20:56:39 GMT -6
thanks I should be more clear, its the red ring around it, the back lighting works for bothe gauges, but the red ring is gone on the speedo. how much of a pain would it be to replace anyway.
|
|
|
Post by Alleyoop on Jul 20, 2011 21:10:26 GMT -6
The red ring is just the color of the lens. I have the same instrument panel as you. Alleyoop
|
|
Certified Clinician
Currently Offline
Posts: 72
Likes: 0
Joined: Jul 8, 2011 8:04:14 GMT -6
|
Post by deanc on Jul 20, 2011 21:30:02 GMT -6
oh, lol thanks, I didnt realize that. I'll get them off the ebay. is there a how to to get the instrument panel off or is it the 4 screws i see.
|
|
|
Post by Alleyoop on Jul 20, 2011 21:39:07 GMT -6
No, you take the windshield off and then the top cover over the instrument panel and then you can see the entire back of the instrument panel. It is only one bulb and it lights both sides the Tach and the Speedo. You just pull it out it is held in by just a rubber round piece. Buy 2 sets that way you can change the Fuel guage bulb and the Volt meter bulb with LEDS. Alleyoop
|
|
Certified Clinician
Currently Offline
Posts: 72
Likes: 0
Joined: Jul 8, 2011 8:04:14 GMT -6
|
Post by deanc on Jul 20, 2011 21:50:48 GMT -6
the tach side is fine, so are all the others, its just the red ring on the speedo, the back lighting on speedo works too.. i still havent figured out how to take the windshield off either i found 4 screws but they didnt seem to allow it to come out. thanks again I really appreciate the help.
|
|
Senior Clinician
Currently Offline
Posts: 247
Likes: 0
Joined: Apr 6, 2010 21:13:58 GMT -6
|
Post by turtle8 on Jul 20, 2011 22:51:38 GMT -6
|
|
|
Post by Alleyoop on Jul 20, 2011 22:59:05 GMT -6
Thanks Turtle you beat me to it(HAHA). I was typing away explaining where the screws are at and what he has to take off. BUT PICS tell the story better. Alleyoop
|
|
|
Post by Cruiser on Jul 20, 2011 23:27:24 GMT -6
|
|
Certified Clinician
Currently Offline
Posts: 72
Likes: 0
Joined: Jul 8, 2011 8:04:14 GMT -6
|
Post by deanc on Jul 21, 2011 6:30:28 GMT -6
thanks guys thats awesome, I was going to be unhappy when I broke it.
|
|
|
Post by Alleyoop on Jul 22, 2011 19:05:54 GMT -6
For the Instrument panel only THREE bulbs, On mine one bulb goes in between the Speedo and the Tach, then one for volt meter and one for the Fuel gauge. Alleyoop
|
|
Certified Clinician
Currently Offline
Posts: 72
Likes: 0
Joined: Jul 8, 2011 8:04:14 GMT -6
|
Post by deanc on Jul 22, 2011 19:33:49 GMT -6
ah ok that explains the dim on the speedo but bright on the right side.
|
|