|
|
Post by Bashan on Mar 29, 2012 3:52:08 GMT -6
Zouri, can you look and see if you have three yellow wires coming from your stator? If you need help with that let me know. Rich
|
|
Clinician
Currently Offline
Posts: 29
Likes: 0
Joined: Mar 24, 2012 9:34:39 GMT -6
|
Post by Zouri on Mar 29, 2012 5:25:36 GMT -6
Zouri, can you look and see if you have three yellow wires coming from your stator? If you need help with that let me know. Rich I can check tonight. Ive got an ignition switch that I matched up on order. My biggest question is where the stator is  . |
|
Scooter Doc
Currently Offline
Posts: 1,936
Likes: 7
Joined: Jun 18, 2010 22:25:14 GMT -6
|
Post by sprocket on Mar 29, 2012 14:48:08 GMT -6
Right hand side of a GY6 engine behind the fan and flywheel.. the wires usually come out on top of the black fan cover...
|
|
Clinician
Currently Offline
Posts: 29
Likes: 0
Joined: Mar 24, 2012 9:34:39 GMT -6
|
Post by Zouri on Mar 31, 2012 14:38:57 GMT -6
Right hand side of a GY6 engine behind the fan and flywheel.. the wires usually come out on top of the black fan cover... Okay.... so I got my new switch and put it in... still doesn't start. Same symptoms as before. I ran the switch tests and got the same results... this must be an issue somewhere else I would think... unless I got unlucky and got a bad switch again. Also, the wires coming from the stator are a red/white, then in a bundle red, white, green and yellow. |
|
Clinician
Currently Offline
Posts: 29
Likes: 0
Joined: Mar 24, 2012 9:34:39 GMT -6
|
Post by Zouri on Mar 31, 2012 15:06:50 GMT -6
Okay... so I just re jumped with the solenoid, and this time my turn signals and lights worked, as did the horn.... but when I would honk the horn it would struggle, like it wasn't getting enough power, then when I held it in for a second it choked the scooter off. I'm so confused. Lol
|
|
Scooter Doc
Currently Offline
Posts: 1,936
Likes: 7
Joined: Jun 18, 2010 22:25:14 GMT -6
|
Post by sprocket on Mar 31, 2012 15:09:43 GMT -6
I think you have a ground issue somewhere.. and unfortunately you will likely need a multimeter to find it...
|
|
Clinician
Currently Offline
Posts: 29
Likes: 0
Joined: Mar 24, 2012 9:34:39 GMT -6
|
Post by Zouri on Mar 31, 2012 16:00:08 GMT -6
I think you have a ground issue somewhere.. and unfortunately you will likely need a multimeter to find it... I have a multimeter. Or do you mean one with a tone for continuity? |
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Mar 31, 2012 17:44:29 GMT -6
get two jumper wires with aligator clips , connect one jumper to the neg batt and the other end to the engine . then connect the other jumper wire to the battery neg and the other end to the frame .
John
|
|
Clinician
Currently Offline
Posts: 29
Likes: 0
Joined: Mar 24, 2012 9:34:39 GMT -6
|
Post by Zouri on Mar 31, 2012 19:48:45 GMT -6
get two jumper wires with aligator clips , connect one jumper to the neg batt and the other end to the engine . then connect the other jumper wire to the battery neg and the other end to the frame . John What will that do? |
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Mar 31, 2012 19:54:08 GMT -6
rule out a ground problem
John
|
|
Clinician
Currently Offline
Posts: 29
Likes: 0
Joined: Mar 24, 2012 9:34:39 GMT -6
|
Post by Zouri on Apr 1, 2012 9:02:48 GMT -6
rule out a ground problem John Just to be sure, should both clips be on the negative terminal? And what should I be looking for? |
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Apr 1, 2012 12:43:07 GMT -6
Yes , and to see if things start working .
John
|
|
Clinician
Currently Offline
Posts: 29
Likes: 0
Joined: Mar 24, 2012 9:34:39 GMT -6
|
Post by Zouri on Apr 2, 2012 7:33:02 GMT -6
Success! I was scouring for any potential bad grounds, and the one from the battery to the frame, the bolt had rust all over it... I cleaned it up and sanded, and it works!
Out of curiosity, I hooked the old switch up and it did not work, so it must've been both issues. I'm so glad to have it back together. Now I just need to fix my kickstarter, and probably adjust my a/f, and see how it runs!
|
|
|
|
Post by Bashan on Apr 2, 2012 8:26:08 GMT -6
Things I know so far: I have continuity from the Negative terminal to the frame. [/size][/quote] Why I oughtta!!
Actually, I'm glad for you and I'm sure you learned a lot. Don't be a stranger and share your riding experiences with us as well as your tech issues. Rich |
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Apr 2, 2012 8:48:15 GMT -6
Zouri , go and buy the aligator clips and make the jumper wires anyway!!!!!
Glad your up and running .
John
|
|
.
