|
|
Post by meworrynot on Feb 25, 2013 15:57:23 GMT -6
I can't seem to find the timing marks on my 244 clone engine. I have the inspection plug out but can't see any marks on the flywheel. Does anyone have a pic of what they look like?
|
|
Scooter Doc
Currently Offline
Live To Ride / Ride To Live
Posts: 620
Likes: 0
Joined: Jun 1, 2011 10:43:34 GMT -6
|
Post by richardthescooter2 on Feb 25, 2013 16:10:58 GMT -6
Go to the home page, click on 250cc to 300cc larger displacement tech, then click on CF Moto/Helix/yy250T valve adjustment from BPNW.
|
|
|
|
Post by meworrynot on Feb 25, 2013 16:58:58 GMT -6
Thanks for that, but I am doing the head gasket and cant find the marks on the flywheel so I can put the cam back in. I don't see the marks and need to see if anyone has a pic of them. The video doesn't show them. But I do appreciate the response. Pete Go to the home page, click on 250cc to 300cc larger displacement tech, then click on CF Moto/Helix/yy250T valve adjustment from BPNW. |
|
|
|
Post by Alleyoop on Feb 25, 2013 19:32:24 GMT -6
It is very hard to see it is actually to the RIGHT of the chain when you look through the hole and will require a flashlight to see it.
Alleyoop
I found a Video about 8:17 minutes into it where he shows where the timing mark is using a flashlight.
|
|
|
|
Post by meworrynot on Feb 26, 2013 15:41:18 GMT -6
I did find the marks on the flywheel, they are very hard to see, on the outer edge of the flywheel. Thanks to all for the help.
Pete in Texas
|
|
..BAD TO THE BONE..