Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 12, 2013 22:12:25 GMT -6
yes it does.... does that mean the other carb will not work?  |
|
|
|
Post by Alleyoop on Aug 12, 2013 22:18:16 GMT -6
See what did I tell you it has a pump, It will work just fine just a different type carb.
99% of the scoots do not come with a carb with a pump they come with like the one your going to buy.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 12, 2013 22:20:33 GMT -6
ok... thats refreshing news... but here is my concern... if you look closely.. most of the carbs i look at have this yellow wire coming off of them... i know the green and yellow go to the choke(enricher) what does the yellow go to and how would i make it work?
|
|
|
|
Post by Alleyoop on Aug 12, 2013 22:24:45 GMT -6
What yellow wire? The enricher has TWO WIRES and it just plugs into the harness plug.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 12, 2013 22:27:55 GMT -6
|
|
|
|
Post by Alleyoop on Aug 12, 2013 22:41:30 GMT -6
Looks like the ENRICHER HAS 3 wires two green and one yellow. So the yellow most likely you can just wrap it up with black electrical tape. You can plug it in and leave the lone yellow alone and start the scoot and see if the ENRICHER EXTENDS out. Must be for different harness that has the plug from the harness as two grounds and the yellow for the live single plug. Tell you the truth I have never seen an ENRICHER with 3 wires.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 12, 2013 22:46:54 GMT -6
|
|
|
|
Post by Alleyoop on Aug 12, 2013 22:50:32 GMT -6
That one has the pump just like yours so that would be plug and play time.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 12, 2013 22:53:24 GMT -6
ok.. after i test the enricher again tomm... and it fails lol... i will order it... You know man.. I APPRECIATE the help and brag about how much you know and how much you help to people everytime i get chance.... ANYWAYS.... will report tomm with roller weight (I want new ones that make me go FASTER) and enricher status...
|
|
|
|
Post by Alleyoop on Aug 12, 2013 22:57:17 GMT -6
COOL, good luck, Remember take the enricher off and lay it on it side, cover the hole with your thumb and start the motor. The plunger should start to EXTEND OUT within a few minutes if it DOES NOT EXTEND it is bad. Also after idleing the ENRICHER SHOULD BE WARM TO LITTLE HOT.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 13, 2013 10:59:58 GMT -6
here are results...  10 mins later bike running whole time  |
|
|
|
Post by Alleyoop on Aug 13, 2013 11:07:36 GMT -6
It did NOT EXTEND. Was the ENRICHER HOT AND OR WARM at the touch? If it is getting juice the ENRICHER it should be warm or hot.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 13, 2013 12:10:36 GMT -6
No it did not get warm here is a video of me trying to test the voltage... input needed  |
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 13, 2013 14:01:28 GMT -6
Got my variator weights out and weighed... they are 14 grams.. 3 of em weighed 14.1.. but they had a lil grease on the inside as well
|
|
|
|
Post by Alleyoop on Aug 13, 2013 15:32:33 GMT -6
Test the plug that the enricher plugs into WITH THE MOTOR RUNNING see if it is LIVE.
As for the weights you can go down to 12s or 13s that will give you more rpms.
Alleyoop
|
|
..BAD TO THE BONE..
