Clinician
Currently Offline
Posts: 11
Likes: 0
Joined: Apr 26, 2013 19:08:43 GMT -6
|
Post by oldmopars on May 20, 2013 13:15:51 GMT -6
Well, I scuffed my scooter today and need to do a little repairs. Does any one know of a source for the red burgandy paint on the MC-54-250B? Rattle can would be great.
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on May 20, 2013 20:46:46 GMT -6
You might want to take off a small panel and run it to a large auto paint dealer. They do have computer paint mixing at the big guys and can also mix paint and put it in a rattle can. Probably is not going to be real cheap but a lot less than a complete paint job or even a big panel replacement.
edit: have them put a drop on the small panel and dry it with hair dryer to be sure of the color
|
|
Clinician
Currently Offline
Posts: 11
Likes: 0
Joined: Apr 26, 2013 19:08:43 GMT -6
|
Post by oldmopars on May 21, 2013 7:58:08 GMT -6
Yea, that may be the best way to go. I was hoping they might have it already to go through some scooter parts place.
|
|
Certified Clinician
Currently Offline
Posts: 66
Likes: 2
Joined: Apr 21, 2013 15:16:30 GMT -6
|
Post by taildrag on Jun 25, 2013 11:06:19 GMT -6
I have the same scoot as pictured. How does one remove those ugly stickers on both sides? Also someone told me the law says they have ti be on the scoot. Anyone know about both questions?
|
|
Clinician
Currently Offline
Posts: 11
Likes: 0
Joined: Apr 26, 2013 19:08:43 GMT -6
|
Post by oldmopars on Jun 26, 2013 21:28:38 GMT -6
I have the same scoot as pictured. How does one remove those ugly stickers on both sides? Also someone told me the law says they have ti be on the scoot. Anyone know about both questions? I just used my finger nail, came off real easy. |
|
Certified Clinician
Currently Offline
Posts: 66
Likes: 2
Joined: Apr 21, 2013 15:16:30 GMT -6
|
Post by taildrag on Jun 28, 2013 12:36:38 GMT -6
Copy that...thanks for your answer.
|
|
