VOLTAGE REGULATOR ON MOPED By datonamanmike (Read 929 times)

[datonamanmike]

I have this voltage regulator I want
to put on my tomos moped that runs
on a mag. meaning it uses no battery
I keep blowing light bulbs a LOT
the bike does have a 70cc kit and
I think by going faster turning more RPM
im producing too much voltage
but I don't know where to install this
can anyone show me how and where to install this??

Attachments:

[Alleyoop]

What did you do take the battery out? If you did that is why it is blowing the bulbs the Regulator/Rectifier needs the battery so it does not send to much juice to the rest of the lights.
Alleyoop

[datonamanmike]

it does not use a battery its a 2 stroke
moped that makes its volts with a magneto (bad spelling??)
this regulator is supposed to regulate the volts so it don't blow
bulbs cause the more rpm the more volts
with the BBK it makes more rpm hence more volts

[borris120]

So the mag powers the lights and everything? I am familiar with systems using mags for spark, but a generator or alternator would supply power for accessories. Guessing that the mag is on the flywheel where the alternator usually goes (at least on larger bikes)?
Boris