Certified Clinician
Currently Offline
Posts: 75 
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jul 26, 2016 14:45:24 GMT -6
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jul 26, 2016 8:31:08 GMT -6
Its a 50mm top end kit so no boring should be required on the bottom end, i would recommend a kevlar belt to deal with the added power. I know the bbk i got for my 50 came with 9g rollers. U may want to get a ring compressor, i know some bbk have the bottom of the jug machined with a slight slope to push the rings in as you slide the cylinder down on the piston, most do not though
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jul 12, 2016 20:28:00 GMT -6
I picked up the xtended vision one for now, im gona pick up a silverstar pure white after i get paid
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jul 12, 2016 19:37:21 GMT -6
The led was just bad, tested it on a friends bike as well same thing and hos headlights are dc fed, ended up doing the h11 swap and im quite pleased, went on a 60 mile ride today to see how bad the heat would be, its a marginal diff from the 45w ba20 bulb i had, and it was over 90 degrees today so i think im golden
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jul 12, 2016 9:32:03 GMT -6
Just realized the h11 is a single beam setup, is it really worth losing the highbeam? The h4s im seeing are high and low problem is theyre all 60w
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jul 11, 2016 16:04:56 GMT -6
Do u have any pics of it mounted in the housing
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jul 11, 2016 12:16:50 GMT -6
Was the h11 standard bulb type on your bike? And does anyone know how i can check what the max draw is for my headlight
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jul 11, 2016 1:44:33 GMT -6
Looks like ill be doing an h4 conversion this way i have some options and can also get bulbs local
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jul 10, 2016 23:17:13 GMT -6
I tried running direct from battery still does the same, majority of these scooters 150cc and under are ac fed lights which is y hid lights dont tend to work properly with them either
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jul 10, 2016 22:17:38 GMT -6
Ok so i got in both bulbs, the 45w had a broken high beam, and the led flickers like crazy at idle till about 3500rpm
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jul 6, 2016 21:05:28 GMT -6
So i ordered one led and one 45w standard bulb, gona test them both to see which works better
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jul 6, 2016 20:10:43 GMT -6
Everything ive seen about leds though is that they scatter light way to much. I was looking at xenon halogens but idk of my housing is large enough to accommodate the heat they put out, especially in nc in the summer
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jul 6, 2016 18:20:14 GMT -6
Probably should have noted that my stock bulb is a ba20d/s2 type not an h4
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jul 6, 2016 16:21:39 GMT -6
So I've been doing a ton of research on headlights and cant find a definitive answer. I want to upgrade from a stock 35w but dont know what i can put in there that wont melt my housing or be to much power draw
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Jun 11, 2016 20:17:58 GMT -6
Do u think high heat jb weld would suffice?
|
|
