Clinician
Currently Offline
Posts: 41
Likes: 1
Joined: Feb 10, 2016 10:23:38 GMT -6
|
Post by raulie72 on Feb 11, 2016 14:41:05 GMT -6
A small piece broke off. I don't think it will make a difference though.....
|
|
Clinician
Currently Offline
Posts: 41
Likes: 1
Joined: Feb 10, 2016 10:23:38 GMT -6
|
Post by raulie72 on Feb 11, 2016 14:39:07 GMT -6
|
|
Clinician
Currently Offline
Posts: 41
Likes: 1
Joined: Feb 10, 2016 10:23:38 GMT -6
|
Post by raulie72 on Feb 11, 2016 14:35:03 GMT -6
Well....i removed the plug... There seems to be another plug after that. Maybe it's just a bronze disk after the aluminium plug? Should i keep digging?
|
|
Clinician
Currently Offline
Posts: 41
Likes: 1
Joined: Feb 10, 2016 10:23:38 GMT -6
|
Post by raulie72 on Feb 11, 2016 13:05:30 GMT -6
Tearing down the carb to remove the plug on the a/f screw. Looking at the intake tube from the filter to the carb seems moist. Oily gas smelling. I don't think the bike is running rich since if I take the filter off the bike will not run...
The bike dies if I do multiple throttle application, seems to flood and boog down unti it shuts off. So I thought removing the filter would give it more air.
I'm going to remove the plug replace everything and start over. Maybe it's just a a/f ratio thing.
Any inputs?
|
|
Clinician
Currently Offline
Posts: 41
Likes: 1
Joined: Feb 10, 2016 10:23:38 GMT -6
|
Booging down
by: raulie72 - Feb 10, 2016 21:17:36 GMT -6
via mobile
Post by raulie72 on Feb 10, 2016 21:17:36 GMT -6
Thanks Alley! Going to try that tomorrow. I guess I should change the spark plug, oils and filter. Full tuneup. Reassemble and adjust. Thanks for the help.
What would be the best plug and gap for this engine?
|
|
Clinician
Currently Offline
Posts: 41
Likes: 1
Joined: Feb 10, 2016 10:23:38 GMT -6
|
Post by raulie72 on Feb 10, 2016 15:39:06 GMT -6
images 1 and 2 are from the left side of the bike images 3 and 4 are from the right five is from the top id sticker vacuum line that goes to the valve in the left side of the bike fuel filter...does it seem OK. looks kind of clear. but not transparent.
|
|
Clinician
Currently Offline
Posts: 41
Likes: 1
Joined: Feb 10, 2016 10:23:38 GMT -6
|
Post by raulie72 on Feb 10, 2016 15:34:59 GMT -6
im not sure why all the images are up side down....
|
|
Clinician
Currently Offline
Posts: 41
Likes: 1
Joined: Feb 10, 2016 10:23:38 GMT -6
|
Post by raulie72 on Feb 10, 2016 15:33:41 GMT -6
|
|
Clinician
Currently Offline
Posts: 41
Likes: 1
Joined: Feb 10, 2016 10:23:38 GMT -6
|
Booging down
by: raulie72 - Feb 10, 2016 12:53:52 GMT -6
via mobile
Post by raulie72 on Feb 10, 2016 12:53:52 GMT -6
Thanks Ally! Will try that. My wife lost her mind when she could not start the bike to go to work. Had to take off her helmet and get in the car. I only got a 15 second call from her "sell the dam thing" ?? I got to get this thing perfect
|
|
Clinician
Currently Offline
Posts: 41
Likes: 1
Joined: Feb 10, 2016 10:23:38 GMT -6
|
Booging down
by: raulie72 - Feb 10, 2016 10:31:13 GMT -6
via mobile
Post by raulie72 on Feb 10, 2016 10:31:13 GMT -6
Hello guys, been a lurker for awhile first time poster. I have a 50cc scooter that boogs when the engine is revved a couple of times in a row. Seems to take off better witb partial throttle than full throttle. Once the bike is moving at speed it runs smoothly and there is no change from full throttle or 1/4 of a turn fron full. Does not like to turn on on cold mornings.
Searched for bogging issues but none seemed similar. Any ideas an where to start?
|
|