Clinician
Currently Offline
Posts: 41 
Likes: 0
Joined: Jun 21, 2016 19:21:04 GMT -6
|
Post by repur71 on Jun 29, 2016 11:24:30 GMT -6
ok thanks a bunch i will definitely try that
|
|
Clinician
Currently Offline
Posts: 41
Likes: 0
Joined: Jun 21, 2016 19:21:04 GMT -6
|
Post by repur71 on Jun 29, 2016 0:58:18 GMT -6
so here is what im planning on doing based on advice you gave me, let me know if I'm wrong in any way picture 1 and 2: so the only ground wire on the engine is this green one that leads to the negative on the battery so is this what I should ground to the frame or sand down? or should i keep this ground where it is and add another ground wire to from the valve cover and have it connect to the frame? Picture 3: would these be good places to connect a ground? and lastly the ground wire that i show in picture one wont reach anywhere on the frame its only long enough to reach the valve cover  1  2  3 |
|
Clinician
Currently Offline
Posts: 41
Likes: 0
Joined: Jun 21, 2016 19:21:04 GMT -6
|
Post by repur71 on Jun 28, 2016 16:31:09 GMT -6
so I checked the continuity with my mutimeter i put the black end to the frame then i put the red to the this ground and it beeped but the reading was allover the place  |
|
Clinician
Currently Offline
Posts: 41
Likes: 0
Joined: Jun 21, 2016 19:21:04 GMT -6
|
Post by repur71 on Jun 28, 2016 4:20:36 GMT -6
so should i replace the old ground wire and lead it to the frame? or just leave the old one where it is while adding another ground wire?
|
|
Clinician
Currently Offline
Posts: 41
Likes: 0
Joined: Jun 21, 2016 19:21:04 GMT -6
|
Post by repur71 on Jun 27, 2016 3:40:23 GMT -6
so I'm pretty sure there's a thread on this subject already but i have yet to find one depicting a situation like mine. I own a 2008 xingyue xy150t that i bought from a friend of mine, it was a pretty nice scooter until the problems started. Long story short I ended up changing all the electrical components like spark plug,CDI, stator, ignition coil and solenoid but Im still not getting a spark, but what i was thinking is theres probably a short somewhere but I dont know for sure. A fresh point of view or some suggestions on what the problem is or what i might be missing would help a lot. two things i know for sure is fuel is getting to the engine dont think its a ignition switch problem either.
|
|
Clinician
Currently Offline
Posts: 41
Likes: 0
Joined: Jun 21, 2016 19:21:04 GMT -6
|
Post by repur71 on Jun 22, 2016 21:47:03 GMT -6
![]()  do you mean ground this wire to the frame? |
|
Clinician
Currently Offline
Posts: 41
Likes: 0
Joined: Jun 21, 2016 19:21:04 GMT -6
|
Post by repur71 on Jun 22, 2016 20:38:54 GMT -6
Im not familiar with the term ground (this is my first scooter) how do I "ground" the engine to the frame?
|
|
Clinician
Currently Offline
Posts: 41
Likes: 0
Joined: Jun 21, 2016 19:21:04 GMT -6
|
Post by repur71 on Jun 22, 2016 19:01:11 GMT -6
tested for spark on cylinder head still nothing
|
|
Clinician
Currently Offline
Posts: 41
Likes: 0
Joined: Jun 21, 2016 19:21:04 GMT -6
|
Post by repur71 on Jun 22, 2016 18:40:19 GMT -6
so the CDI, solenoid and spark plug wire are from the same place online but not the stator
|
|
Clinician
Currently Offline
Posts: 41
Likes: 0
Joined: Jun 21, 2016 19:21:04 GMT -6
|
Post by repur71 on Jun 22, 2016 18:35:29 GMT -6
what would running a ground wire to the frame from the engine do?
|
|
Clinician
Currently Offline
Posts: 41
Likes: 0
Joined: Jun 21, 2016 19:21:04 GMT -6
|
Post by repur71 on Jun 22, 2016 17:40:24 GMT -6
so I'm pretty sure there's a thread on this subject already but i have yet to find one depicting a situation like mine. I own a 2008 xingyue xy150t that i bought from a friend of mine, it was a pretty nice scooter until it wasn't keeping an idle. Long story short I ended up changing all the electrical components like spark plug,CDI, stator, ignition coil and cylinoid but Im still not getting a spark, but what i was thinking is theres probably a short somewhere but I dont know for sure. A fresh point of view or some suggestions on what the problem is or what i might be missing would help a lot. two things i know for sure is fuel is getting to the engine dont think its a ignition switch problem
|
|
