Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on May 20, 2013 0:10:39 GMT -6
Is the timing a must? I mean if I can get away with not messing with the timing it sure would make my journey tomm easier.
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on May 20, 2013 0:00:00 GMT -6
The timing might b hard to get too now that I am looking at it... I might jave my hands full for awhile tomm.. but what gaps should I set them at
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on May 19, 2013 23:58:08 GMT -6
Its much easier on my bike.. they are both easy to get to but gotta get gages..
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on May 19, 2013 23:49:26 GMT -6
Thanks!! Ok on the video it says top at 10mm and bottom is 18.. which contradicts your settings.. which should I go with?
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on May 19, 2013 23:43:00 GMT -6
Thanks!! Ok on the video it says top at 10mm and bottom is 18.. which contradicts your settings.. which should I go with?
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on May 19, 2013 23:31:14 GMT -6
Yes that is my motor.. will get feelers tomm and adjust properly. And also the spark plug will pull and post results.. thanks... but any other ideas?
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on May 19, 2013 23:05:50 GMT -6
Ok now here comes my nube skills... I didn't even know there was an exhaust valve? The only one I openes was one on top.. where is the lower one located? Or am I thinking the wrong way?
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on May 19, 2013 23:00:29 GMT -6
Ohh btw.. the bike is a 2008 with only 900 miles on it
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on May 19, 2013 22:59:32 GMT -6
Lol.. yes that is my intent. .. I am thankful for the help for sure. Do u think3/4 of a turn was enough or should I open it more?
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on May 19, 2013 22:50:04 GMT -6
I will b straight lol.. I did not have feeler gage.. I just opened it up 3/4 of a turn. I need to get gauge sorry...
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on May 19, 2013 22:25:00 GMT -6
I have adjusted the valve...didn't help
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on May 19, 2013 22:10:11 GMT -6
I will tomm but my guess is white ashy... but will confirm tomm thanks
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on May 19, 2013 21:53:44 GMT -6
I have had my scooter for about a month now and it was running perfect up tell a week ago.I was riding at about 55mph and it started to get sluggish.. cutting in and out and dropping rpms. At first I thought bad gas. But I drained the gas put in new and still has problem. Since this time the performance has gone way way down. I can't go over 30 mph now. When I put it on the stand it screams like a raped ape, 6000 rpm, but as soon as I either apply rear break or put it down, the rpms will not get over 3000. What can cause this? I have changed rear gear oil, oil change, adjusted the valve, and checked rear brake for flaws. None of these have helped at all. Anyone? Please help... this model is a clone of yamaha yp250.
|
|
