Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Apr 15, 2014 22:23:29 GMT -6
Anyone ever have this happen before? I also noticed that if I have it idleing and I push the kill switch to the kill setting it stays running. but if I push the kill switch to the kill setting and try to start it the scooter wont start. shouldnt it kill it if its running?
|
|
Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Apr 15, 2014 8:57:03 GMT -6
okay guys I have got back on the scooter again last night trying to get this thing going. as it turns out I put my timing light on and when I start to throttle up the fire actually cuts out. that is what's making it miss when i throttle it up. the timing is not off. I have already verified that the CDI is good by swapping it with a known good one what else should I check?
|
|
Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Apr 8, 2014 5:54:03 GMT -6
I tried that last nite. the intake side will go all the way to the outside and never feel any resistance. the exhaust side does. I have lined up the piston all the way at the top with the cam and it is dead on the second mark(im assuming its the f mark, the first I think is a t mark). when I run the scoot at idle I check with my timing light and the mark is a hair to the right of the notch. and it still wont throttle up.
|
|
Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Apr 7, 2014 20:41:04 GMT -6
Ok im on the hunt for a replacement valve cover and rockers. I think there is a problem with mine.
|
|
Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Apr 6, 2014 17:51:55 GMT -6
|
|
Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Apr 6, 2014 17:50:26 GMT -6
I can put my timing light on it and it shows a single mark but is about 1/4 inch away.
|
|
Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Apr 6, 2014 17:39:05 GMT -6
thats what im thinking....the timing chain has been off from the previous owner so I dont know where to put it. I can set the piston at tdc and move the cam to match but the marks on the flywheel dont match.
|
|
Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Apr 6, 2014 16:55:41 GMT -6
Ok on the flywheel...It has several different marks. from left to right it looks like this.....
I I II
which mark should be set at top dead center with the timing cam?
|
|
Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Apr 6, 2014 16:03:53 GMT -6
Im stuck...I think the timing is still off. I have checked everything and it just wont run....
|
|
Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Apr 6, 2014 11:31:29 GMT -6
im back from Las Vegas and now I need to get this thing running.
|
|
Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Apr 6, 2014 11:30:15 GMT -6
|
|
Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Apr 1, 2014 8:22:02 GMT -6
This one has sound
|
|
Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Apr 1, 2014 8:21:23 GMT -6
|
|
Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Mar 30, 2014 20:53:32 GMT -6
|
|
Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Mar 30, 2014 20:34:13 GMT -6
There is http:// in front of it but if u click the link it let's u watch the video
|
|
