|
|
Post by heruk on Dec 2, 2014 17:01:57 GMT -6
found this:
|
|
|
|
Post by heruk on Dec 2, 2014 17:00:39 GMT -6
OMGoodness the exhaust valve is leaking like a faucet. How do i clean it?
|
|
|
|
Post by heruk on Dec 2, 2014 16:43:33 GMT -6
thanks
i havnt been able to figure out how to clean the valves though. the springs are so tough i cant budge em. if they dont leak is there no problem?
I hope Alley is ok.
|
|
|
|
Post by heruk on Dec 2, 2014 16:01:45 GMT -6
you pour the gas into the port,,,intake and exhaust thats where you will see the leak Can you please give me an illustration of the port |
|
|
|
Post by heruk on Dec 2, 2014 14:27:13 GMT -6
Ok so I poured gas over the valve springs and there is no leak. Im considering buying a new head with valves installed along with the rocker arms. Is that a bad idea? if it is a compression issue it is due to a leak in the head right?
My pops said i have a weak ignition coil and should order one as well. what do you think?
|
|
|
|
Post by heruk on Dec 2, 2014 13:56:25 GMT -6
No, nothing attaches to those nipples. That's your vapor canister and it is probably your problem. Here is how it works:
Here is how you remove it:
Make sure you tie the vent hose off of the tank high so it doesn't slop gas or get a fluid block in it. That's probably your problem, the canister system is blocked somewhere and the resulting vacuum is shutting down your bike. The vapor recovery system is junk, get rid of it. What do you use as a filter in the #1? Can you use red rtv to plug the air box? |
|
|
|
Post by heruk on Dec 1, 2014 16:32:42 GMT -6
Alleyoop how do i clean the valves? with a c clamp?
|
|
|
|
Post by heruk on Dec 1, 2014 15:04:57 GMT -6
   Just beautiful!!!! Ill have to order a new one but how do i clean the valves anyway? the frikin springs are as hard as I am I want to pour some gas on em after theyre cleaned |
|
|
|
Post by heruk on Dec 1, 2014 13:54:32 GMT -6
cyborgI hear a hissing sound but am having trouble locating it
|
|
|
|
Post by heruk on Nov 30, 2014 11:45:02 GMT -6
lol screw that! im going to check the valves now
|
|
|
|
Post by heruk on Nov 30, 2014 5:41:09 GMT -6
a sym?
|
|
|
|
Post by heruk on Nov 30, 2014 5:40:50 GMT -6
阿随员们?
|
|
|
|
Post by heruk on Nov 29, 2014 22:33:03 GMT -6
god  can i buy to make this all go away?!?! |
|
|
|
Post by heruk on Nov 29, 2014 21:42:20 GMT -6
so i got a new o ring and spark plug. it seems to want to start and I smell burning fuel(exhaust) but it just wont start. The spark is red and blue... Faulty coil?
havnt checked the valves yet
|
|
|
|
Post by heruk on Nov 26, 2014 15:25:59 GMT -6
I havnt had the chance to work on the bike yet so i havnt cleaned out the valves and done the gas test.
i was wondering if not being able to tighten the bolts for the exhaust connection at the cylinder head could be the problem
|
|
can i buy to make this all go away?!?!