Scooter Doc
Currently Offline
Posts: 274
Likes: 1
Joined: Aug 25, 2013 21:40:53 GMT -6
|
Post by mikey34 on Jun 1, 2014 16:05:18 GMT -6
I have a Vespa ET2 50cc in the shop, Short Story, It's SPEWING gas out of the exhaust, I'm going with a replacement carb. The carb that is on it is made by WEBER(19mm), Do you guys see any reason why I couldn't fit a 2 stroke Yamaha Jog carb (19mm)  EBAY/Yamaha Jog, 2 stroke Carb. |
|
|
|
Post by Alleyoop on Jun 1, 2014 16:33:14 GMT -6
Not a problem as long as the oil feed to the carb fits onto the carb or maybe not needed if you premix.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 274
Likes: 1
Joined: Aug 25, 2013 21:40:53 GMT -6
|
Post by mikey34 on Jun 1, 2014 20:39:24 GMT -6
Thank you Alley! I was hoping so! It feeds it's own oil, thankfully so does this carb, I am planning on just crimping on the connector for the electric choke, and putting the throttle cable into the slide. It's a 19mm, so I just didn't see any difference!
|
|
..BAD TO THE BONE..