Blocked Off EGR Issues By tycomike (Read 250 times)

[tycomike]

So I recently ran into some emission and exhaust issues. I put a blocking plate on the EGR port. Now it seems the scoot isn't topping out. I'm getting up to 85km/hr max. Before I was doing 100km/hr. What do I need to look at or adjust. Thanks.

Mike


Sent from my iPhone using Tapatalk

2011 Benzhou Saga 150cc
4,000kms+

[adamhoyer]

I'm thinking you have to adjust everything on the carb again when you do that if I'm not mistaken. Ally or Bashan will know.

[Alleyoop]

Here is how to adjust the carb:
www.scooterdoc.proboards.com/thread/1499/4ts-carb-tuning

But I do have to tell you, If that is a stock motor NO WAY was it doing 62mph. Your lucky if it does a real 55mph stock.
Alleyoop