Trike axles By kalee (Read 1,989 times)

[kalee]

Alley, some where on this SCDF is a picture or website that show's how the rear axle's are supposed to look if an when they come loose an how to correct them. A Little help would be greatly appreciated.

kalee

[Alleyoop]

What trike do you have and what is the problem? There are no such websites that I know of that shows how to fix anything on a trike axle. But if you can explain what your problem is I may be able to help you and or Jim From Rapid Repair. It all depends on which axle you have on your trike.

[kalee]

Aug 6, 2014 15:22:03 GMT -6 Alleyoop said:

What trike do you have and what is the problem? There are no such websites that I know of that shows how to fix anything on a trike axle. But if you can explain what your problem is I may be able to help you and or Jim From Rapid Repair. It all depends on which axle you have on your trike.

[kalee]

I'm laying on the cement floor looking up at this bolt, the threaded bolt sticking down is one of the bolts that holds the fender bracket on the axle housing and the other bolt with the head is the one I'm talking about, this is a ZH-300ZA trike not sure if it is an Ice bear but thinking it is.Brake calliper and wheel would be at the bottom of the picture

kalee

[Alleyoop]

That middle bolt sticking out is just to hold the bracket in place, Mine has that as well. Nothing to worry about, it tightens onto the axle shaft so the fender holder bracket does not rotate and move the fenders after you aligned them how you want them over your tire.
Alleyoop

HERE YOU CAN SEE MINE:

[davec]

zh-300za is an Icebear 300cc Magnum

[Alleyoop]

That's a fact jack and a early one that axle on them was a 2010 version a straight axle then they changed the axles and differential on them made them with independant suspension with cv joints. Which brought on different set of problems.

[kalee]

Aug 6, 2014 19:20:31 GMT -6 Alleyoop said:

That's a fact jack and a early one that axle on them was a 2010 version a straight axle then they changed the axles and differential on them made them with independant suspension with cv joints. Which brought on different set of problems.

Thanks Alley & Davec, I thought maybe this bolt had something to do with holding the axle in place. I sure would like to have the differential thats in this trike installed in my trike mine is a 150cc IB but it probably wouldnt work, this differential looks like one in an automobile no slinging grease like the one i have.

kalee

[royldoc]

Mine is a 2010 Magnum 300R and it has independent rear suspension. what year is your model?

Yes that is a fender bracket bolt. The two on the outside hold the clamp around the axle and the one in the middle allows for some adjustment of the fender.

Roy

[kalee]

Aug 6, 2014 20:51:55 GMT -6 royldoc said:

Mine is a 2010 Magnum 300R and it has independent rear suspension. what year is your model?

Yes that is a fender bracket bolt. The two on the outside hold the clamp around the axle and the one in the middle allows for some adjustment of the fender.

Roy

Roy, the one I'm working on right now is a 2010 300ccZA IB magnum but its a little ruff. Looks like its been sitting outside which down here in south Tx. isnt a good idea because they rust so bad. This trike belongs to another person and she is in the hospital and ask me if I would ride it once in a while to keep everything lubricated. It has a few problems and I have not been thru all of it yet, ( Its just to hot here to work on it afternoon )I guess I'm just going to start it up once in a while and keep the engine lubricated.

kalee