scooter with alarm (need help with install By catman25 (Read 252 times)

[catman25]

i have a little alarm . it does have remote start (get into that later) It has 2 yellow wires that connect to lights . what would be the best spot to conect these that would signal front and back at same time ? at the switch ? at the  relay ? I have the front off and looks like just power / ground / and illuminator lights all thats needed for basic install . I can not think how a switch relay works is on side left other right or am I thinking of this wrong  .. also remote starter prolly cant happen cause i have to pull brake to start right  ? 

[jct842]

Don't know if you have read any thing here about how much trouble there has been with scooter alarms but there have been a bunch. If your alarm is one that comes with the scooter I would be skipping it. Some of the after market one may be more trouble free and in that case I would just follow the instructions that with the alarm and not try to customize the install.

Dead batteries and it turns over and refuses to start are common with OEM alarms.