|
|
Post by Alleyoop on Feb 23, 2016 20:02:08 GMT -6
Looks like the TWO bumps on this part have to make contact with both wires.  |
|
|
|
Post by olivertwisted on Feb 23, 2016 20:06:14 GMT -6
|
|
|
|
Post by Alleyoop on Feb 23, 2016 20:09:28 GMT -6
After what you did with the scoot that switch does not have a prayer it will turn out brand new   |
|
|
|
Post by olivertwisted on Feb 23, 2016 21:17:21 GMT -6
Ok so, she's cleaned up and back on the bike. When I ground the green/white wire to the frame, it does activate the solenoid but using the switch alone will not activate it. I checked the red/yellow wire for continuity to the harness by the solenoid and continuity is good.So, the switch is culprit and it didn't fix? Here is a cross section pic of the switch, for the curious.  |
|
|
|
Post by olivertwisted on Feb 23, 2016 21:18:02 GMT -6
LOL! It seems, no such luck!
|
|
|
|
Post by olivertwisted on Feb 23, 2016 21:19:00 GMT -6
I wonder if I need to bend those tangs forward in the switch?
|
|
|
|
Post by Alleyoop on Feb 23, 2016 21:24:40 GMT -6
Give it a shot nothing to loose but what I would do is put something behind them because they will bend back and not make contact. But great try since you cannot get a switch right away nothing to loose and you know how to activate it without it for continuing on with starting the motor and getting that all setup while you wait on a switch HECK you can use a toggle switch for that matter ON and OFF.
Alleyoop
|
|
|
|
Post by Alleyoop on Feb 23, 2016 21:33:28 GMT -6
|
|
|
|
Post by olivertwisted on Feb 23, 2016 21:46:00 GMT -6
Me thinks, me does have a toggle somewhere in me tool box. I'll check in 5 minutes! I'm scarfing down 2 frozen Posada Chimi's ,(Noooooo, they're not STILL frozen) lol!
|
|
|
|
Post by Alleyoop on Feb 23, 2016 21:49:17 GMT -6
HAHAHAHA, eat hardy, yea all is needed is to make contact with both wires is all and a toggle switch heck even a light switch will work |
|
|
|
Post by Alleyoop on Feb 23, 2016 21:50:25 GMT -6
HAHAHAHA, eat hardy, yea all is needed is to make contact with both wires is all and a toggle switch heck even a light switch will work I had one guy could not afford a new ignition so I told him to use a light switch for his ignition off and on, worked like a charm |
|
|
|
Post by olivertwisted on Feb 23, 2016 21:52:17 GMT -6
I've had this around foreeeeeeverrrrr !!!  |
|
|
|
Post by olivertwisted on Feb 23, 2016 21:53:42 GMT -6
That's funny! It did pop into my mind too. My landlords shed is NEVER locked, lol!
|
|
|
|
Post by Alleyoop on Feb 23, 2016 21:54:51 GMT -6
There you go hook up both wires and you have TAKEOFF  |
|
|
|
Post by olivertwisted on Feb 23, 2016 22:00:19 GMT -6
This may seem silly but, how the heck does one release the wires from the connector without mangling it? I've put a precision screwdriver in from every angle with quite some forceand am afraid to ruin it.
|
|
..BAD TO THE BONE..
