Clinician
Currently Offline
Posts: 16 
Likes: 0
Joined: Dec 16, 2015 7:21:30 GMT -6
|
Post by donny on Apr 1, 2016 5:54:03 GMT -6
Does anyone know where I can find parts for my new bike?
|
|
|
|
Post by Alleyoop on Apr 1, 2016 11:08:20 GMT -6
What kind of parts? and what is the problem? You can throw parts at it not knowing what the problem is and just waste your money. So if something is wrong or not working explain the problem we may be able to help and tell you what you need and or need to do to fix the problem. Since it is a chinese scooter most shops will not touch it and you either will need to dive in and get your hands dirty or find someone that is mechanically inclined to help.
Alleyoop
|
|
Clinician
Currently Offline
Posts: 16
Likes: 0
Joined: Dec 16, 2015 7:21:30 GMT -6
|
Post by donny on Apr 1, 2016 11:29:42 GMT -6
There is nothing wrong with it Alleyoop. just curious in case something does go wrong with it.
|
|
|
|
Post by Alleyoop on Apr 1, 2016 11:35:07 GMT -6
|
|
Clinician
Currently Offline
Posts: 16
Likes: 0
Joined: Dec 16, 2015 7:21:30 GMT -6
|
Post by donny on Apr 14, 2016 8:18:47 GMT -6
Thanks!! Does anyone know why one both sides burn differantly. One exhaust pipe gets hotter than the other.
|
|
|
|
Post by Alleyoop on Apr 14, 2016 10:47:28 GMT -6
I would imagine that side the carb is set a little on the lean side.
|
|
Clinician
Currently Offline
Posts: 16
Likes: 0
Joined: Dec 16, 2015 7:21:30 GMT -6
|
Post by donny on Apr 14, 2016 11:08:18 GMT -6
I have both screws set the same on both carbs.IDK
|
|
|
|
Post by Alleyoop on Apr 14, 2016 11:23:50 GMT -6
Setting the mixture screws the same on both carbs does not make things sameo sameo. Don't forget you have two 125cc motors and each motor runs differently, one can have more compression than the other also the valve gaps can be different from one to the other as well as the plug gaps. Setting them both the same you are close, but the one that is getting hotter richen that one up a tad try 1/4 turns
at a time.
Alleyoop
|
|
Clinician
Currently Offline
Posts: 16
Likes: 0
Joined: Dec 16, 2015 7:21:30 GMT -6
|
Post by donny on Apr 14, 2016 11:29:12 GMT -6
Didnt think of it that way. Thanks Alleyoop
|
|
|
|
Post by Alleyoop on Apr 14, 2016 11:45:52 GMT -6
Counter Clockwise to Richen, Clockwise to Lean.
|
|
Clinician
Currently Offline
Posts: 16
Likes: 0
Joined: Dec 16, 2015 7:21:30 GMT -6
|
Post by donny on Apr 14, 2016 12:04:27 GMT -6
Appreciate it!!
|
|
Clinician
Currently Offline
Posts: 16
Likes: 0
Joined: Dec 16, 2015 7:21:30 GMT -6
|
Post by donny on Apr 21, 2016 6:07:31 GMT -6
Running strong now, Valves needed readjusting, and took carbs back off,lo and behold, another ports was clogged. thanks for input Alleyoop!!
|
|
Clinician
Currently Offline
Posts: 16
Likes: 0
Joined: Dec 16, 2015 7:21:30 GMT -6
|
Post by donny on May 24, 2016 5:36:20 GMT -6
Can anyone tell me why my bike stalls out in the early morning hrs everytime I ride to work, I leave out bout 5:30am. If I leave out bout 8ish, it does fine.IDK! I dont think its just cold natured.
|
|
Clinician
Currently Offline
Posts: 16
Likes: 0
Joined: Dec 16, 2015 7:21:30 GMT -6
|
Post by donny on Jun 1, 2016 9:28:43 GMT -6
Where did alleyoop dissappear to? Hes about the only one on here that helps me out.
|
|
..BAD TO THE BONE..