Senior Clinician
Currently Offline
East Tawas MI
Posts: 119
Likes: 0
Joined: Sept 11, 2011 14:47:52 GMT -6
|
Post by Tawas on Apr 13, 2016 6:35:49 GMT -6
I have a 150cc and having issues idling I cleaned carb and do know about the klien very much I have the common CV carbs but not this klien one.. I know the enricher isnt working but think the side vacuum has issues also.. I would like to switch the carb to the one other more common kind that are on most of the scooters and get rid of this klien as I have many of in stock and have lots of experience with the easier common cv is this possible and if I can what are the jet sizes for a stock 150cc as no mods are on here just for not want to switch same 24mm size I believe but what jets do I need ..I just don't like the klien there not as simple as the regular gy6 cv carbs ..so can anyone tell me the size carb and jets to buy for stock 150cc go Karts gy6 ..thank you .
|
|
|
|
Post by Alleyoop on Apr 13, 2016 11:26:10 GMT -6
I think you are confused a little, the after market carbs are clones of the KEIHIN carb they are both the same. You pay more for a KEIHIN only because it has a better outside finish and a BLACK cover on top and maybe a different float other than that everything else is the same. So you basically paying for the looks more than anything else for a KEIHIN.
What is the problem with the IDLE? These are very simple carbs not much to them. I know carbs like the back of my hand SO EXPLAIN TO ME what it is doing whan at IDLE OR PUT UP a VIDEO of your motor running at idle.
QUESTIONS:
1. How do you know the ENRICHER is not working?
2. Is the IDLE bouncing MEANING it idles up and down?
3. When it is idling is the rear wheel spinning?
4. Is the Idle to low?
5. Turning the FUEL RATIO MIXTURE screw in EITHER direction does it change the IDLE?
6. What do you mean the SIDE VACUUM has an ISSUE? What are you talking about.
Also put up pictures of the CARB AREA and HOSES and AIR FILTER and INTAKE MANIFOLD to see what setup is on your scoot. The Carbs are 24mm which are more than enough for a 150cc. If you have it modded you can just up jet the carb no big deal.
GET BACK TO ME ON MY QUESTIONS AND PICTURES.
Alleyoop
|
|
..BAD TO THE BONE..