Gy6 burnt cable won't start [SOS] By joelite (Read 295 times)

[joelite]

My gy6 won't start due to a burnt wire. It burned the brake cable too.


How can I replace it and what else should i know about burnt parts? THANKS!






ATTN: My spark plug was replaced by a bigger spark plug, since the latter one became lose and lost its thread, we had to replace the thread with a bigger size and a bigger spark plug. 

[trashtruck12172]

go to our library and look at a generic diagram then trace the wire from where it starts to where it goes. that looks like something that will pop the fuse.

[crwford]

I'm really surprise the fuse did blow first? Why not just trace each wire and put in a splice on each one. I did the very same thing on my trike my stupidity caused my mess

while it runs I am waiting for a new harness for my Zodiac

[joelite]

Thanks for your replies, i just came back from the shop and my mechanic said he will check it out see if the fuse still works, tilll monday.

I wanted to get hands on this but it seems like more work than i can take.