Clinician
Currently Offline
Posts: 43
Likes: 1
Joined: Apr 23, 2010 16:15:15 GMT -6
|
Post by barry on Aug 17, 2016 14:50:31 GMT -6
My Jonway can turn over just fine, I smelled gas so I know it can flood. So starter is good, battery is good, gas is getting through. Anyone know where the sparkplug is..? How can I tell if it's getting spark..?
What else could it be..? Where is the "fuel filter"..? Worked perfect till this morning...
So I guess I'm asking where is the sparkplug and the fuel filter are on 2011 Jonway YY250T
thanks barry
|
|
Certified Clinician
Currently Offline
Posts: 80
Likes: 1
Joined: Mar 21, 2012 16:11:55 GMT -6
|
Post by 4950cycle on Aug 19, 2016 22:38:46 GMT -6
I'm not familiar with every Jonway 250 model #. But, If its anything like my JCL MP250A your spark plug and fuel pump are accessed from the plastic belly pan. I have a trap door I made for mine. This way every time any itsy bitsy thing goes wrong I don't usually have to rip my entire scooter apart now. Also, I noticed you said you smelled gas. First, make sure no fuel lines are not damaged or pulled off, if not. Then If you can somehow give the float bowl on your carburetor a few sharp wraps to shake your float loose in case it is stuck. If the carb float is stuck open it will super flood. Leaving it hard to clear all the liquid gas out of the cylinder even. The carb float bowl is kind of hard to access on my 257cc Linhai drivetrain. I think the CN 250s drivetrains are easier to get at the carb float bowl from the top (Under the seat).
|
|
