Clinician
Currently Offline
Posts: 2
Likes: 0
Joined: Aug 27, 2022 12:46:02 GMT -6
|
Post by leonhayes on Aug 27, 2022 12:53:24 GMT -6
Hi, i have a gy6 50 which isn’t starting I’ve checked fuel, spark, compression they are all good,
Adjusted the valves again to 0.05 for both and made sure cam was lined up with top dead center but is still won’t start does anyone know what it could be?
Thanks
|
|
|
|
Post by kz1000st on Aug 27, 2022 17:55:31 GMT -6
Change the spark plug. Check compression. I had a 50cc that wouldn't start and everything checked out, even spark. The plug was blowing out under compression and wouldn't start. New plug fired right up.
|
|
Clinician
Currently Offline
Posts: 2
Likes: 0
Joined: Aug 27, 2022 12:46:02 GMT -6
|
Post by leonhayes on Aug 29, 2022 7:53:58 GMT -6
Thanks I’ll try that tonight, I had a problem a few days ago where the engine wouldn’t crank over if the spark plug was in it would crank over once stop and carry on doing it that fixed itself I don’t know how I don’t know if to at has anything to do with it?
|
|
