Post by br4inl3ss on Aug 3, 2023 15:27:01 GMT -6
hi.
ima try to keep it short.
sicne years i own it it was almost never running right.
i was unable tog et any help because when people hear 4 stroke or chinese scooter they want to commti suicide. often got nosense reply " get a 2 stroke ".
over 20 time i got a reply saying if you cannot get it to run with 4 or 5 different cvk carb including a keihin , get a dellorto pgbh.
5 or 6 time people said " get a phbg from dellorto. only dellorto make working carbs".
as nosense as it it, it was my only hope to fix that peice of junk getting help.
so now i ruined myself with a 6th carb but this time a 19mm phbg from dellorto.
now that i have it, i went on all forums/reddit that forced me to get a phbg, and now they all run away because its a 4 stroke. DAMN motherscrewers i spammed it was a 4 stroke and even got warnings because at the top of the message it was like " its a 4 stroke gy6 50cc its a 4 stroke not a 2 stroke read it properly its a screwing 4 stroke 139qmb 4 stroke" in caps.
i even replied "ok thanks but are you sure phbg fit on 4 stroke" they said yes. at every damn place.
but still they all run away and say they're sorry they didnt KNOW it was on a 4 stroke. thank you very much dumbscrews.
anyway...
bought cable to fit it and everything.
stock w9 needle, stock choke jet. right now a #30 pilot jet ( stock 45 way too big ), and 90 main ( didnt really play with that yet ). stock 4 stroke type internals ( AN atomizer and whatsoever ).
start fine when hot ( no choke needed when cold ), and when im able to get in the high rpm ( 6 to 8k ), its a bit poor but its fine. the rare time i can make it reach 3k rpm or so VERY slowly, it return to stable idle properly that i set at 1900 right now. release throttle it drop to 1900 not going faster or slower, spot on 1900 so i guess idle is set properly.
thing is if i got fast on throttle ( i dont even need to go past 1/4... just barely move the throttle, but FAST ) it die.
any idea ?
i cant enum,erate everything thats been done but if you ask ill answer.
PS with 5 different cvk carb, the problem is just a tiny bit better, but they create other issue.
ima try to keep it short.
sicne years i own it it was almost never running right.
i was unable tog et any help because when people hear 4 stroke or chinese scooter they want to commti suicide. often got nosense reply " get a 2 stroke ".
over 20 time i got a reply saying if you cannot get it to run with 4 or 5 different cvk carb including a keihin , get a dellorto pgbh.
5 or 6 time people said " get a phbg from dellorto. only dellorto make working carbs".
as nosense as it it, it was my only hope to fix that peice of junk getting help.
so now i ruined myself with a 6th carb but this time a 19mm phbg from dellorto.
now that i have it, i went on all forums/reddit that forced me to get a phbg, and now they all run away because its a 4 stroke. DAMN motherscrewers i spammed it was a 4 stroke and even got warnings because at the top of the message it was like " its a 4 stroke gy6 50cc its a 4 stroke not a 2 stroke read it properly its a screwing 4 stroke 139qmb 4 stroke" in caps.
i even replied "ok thanks but are you sure phbg fit on 4 stroke" they said yes. at every damn place.
but still they all run away and say they're sorry they didnt KNOW it was on a 4 stroke. thank you very much dumbscrews.
anyway...
bought cable to fit it and everything.
stock w9 needle, stock choke jet. right now a #30 pilot jet ( stock 45 way too big ), and 90 main ( didnt really play with that yet ). stock 4 stroke type internals ( AN atomizer and whatsoever ).
start fine when hot ( no choke needed when cold ), and when im able to get in the high rpm ( 6 to 8k ), its a bit poor but its fine. the rare time i can make it reach 3k rpm or so VERY slowly, it return to stable idle properly that i set at 1900 right now. release throttle it drop to 1900 not going faster or slower, spot on 1900 so i guess idle is set properly.
thing is if i got fast on throttle ( i dont even need to go past 1/4... just barely move the throttle, but FAST ) it die.
any idea ?
i cant enum,erate everything thats been done but if you ask ill answer.
PS with 5 different cvk carb, the problem is just a tiny bit better, but they create other issue.