Clinician
Currently Offline
Posts: 3
Likes: 0
Joined: Aug 5, 2023 0:12:55 GMT -6
|
Post by vz3013 on Aug 5, 2023 0:18:46 GMT -6
Hello I have a 150cc GY6 engine in a quad identical to one that would be in a scooter, I still have much to learn to transmissions but when I try to start the engine the quad just wants to start driving on its own without me pressing the throttle at all and I have to hold the throttle a little bit to get it started. When it is started it will want to drive forward without me pressing the throttle and will eventually stall. When I stop to put the chain back on the quad, it won't roll forward or backwards as if something in the CVT is stopping it from freely rolling when engine is off
|
|
|
|
Post by kz1000st on Aug 5, 2023 12:05:26 GMT -6
Take it apart and see. One of the rollers could be stuck and jamming the CVT into the engaged position. If not that check the clutch. One arm on the pads could be stuck.
|
|
Clinician
Currently Offline
Posts: 40
Likes: 2
Joined: Aug 12, 2022 13:34:53 GMT -6
|
Post by classacted on Aug 7, 2023 10:47:19 GMT -6
I really like the fact that MY gy6, and probably yours too, can work without the transmission cover. the cover is not needed.
|
|
Clinician
Currently Offline
Posts: 3
Likes: 0
Joined: Aug 5, 2023 0:12:55 GMT -6
|
Post by vz3013 on Aug 11, 2023 22:06:23 GMT -6
Well since mine is in a quad, it sticks out the side, wouldn't want my foot to go in it.  classacted |
|
Clinician
Currently Offline
Posts: 3
Likes: 0
Joined: Aug 5, 2023 0:12:55 GMT -6
|
Post by vz3013 on Aug 11, 2023 22:09:10 GMT -6
The cover for some reason has a gasket  and I don't know why. there isn't supposed to be oil in it or anything but the gasket has been there for some time and the cover wont come off, I cant think of how to remove it without damaging the cover. kz1000st |
|
and I don't know why. there isn't supposed to be oil in it or anything but the gasket has been there for some time and the cover wont come off, I cant think of how to remove it without damaging the cover.