|
|
Post by royldoc on Nov 1, 2010 10:57:29 GMT -6
Finally got the p.d.i. done on the new pst50s-8. Jacked up the rear tires and started it up.This took some time. after it started rear tires were spinning real fast. Backed idle down till wheels just started to turn. Now it idles to slow and keeps dieing.
Roy
|
|
|
|
Post by Alleyoop on Nov 1, 2010 13:18:50 GMT -6
Royldoc,
You want it to idle around 1500-1800 rpms. Don't worry about the lifting it up like on a regular scoot and adjusting the idle. You have a lot of weight on the rear wheels with the tires and axle. Just set it down on the tires and adjust the idle. It is not going to move it won't start to move until around 3000 rpms.
Alleyoop
|
|
|
|
Post by royldoc on Nov 2, 2010 12:24:44 GMT -6
Turns out it was a vacuum leak in vapor canister. Just disconnected hose and plugged manifold. Runs smooth now but haven't got to ride yet. Will test ride tomorrow.
Roy
|
|
Doc's Anything Goes
Currently Offline
Posts: 765
Likes: 28
Joined: Apr 2, 2010 6:37:07 GMT -6
|
Post by rapidjim on Nov 2, 2010 14:02:35 GMT -6
Turns out it was a vacuum leak in vapor canister. Just disconnected hose and plugged manifold. Runs smooth now but haven't got to ride yet. Will test ride tomorrow. Roy HEHEHEHE Told ya soooooooo !!!! LOL!!!!!! |
|
|
|
Post by royldoc on Nov 2, 2010 23:05:51 GMT -6
Ya you did and I thank you. By the way got the M.C.O. today. Thank's to RapidJim I got a sweet looking red and white pst50s-8 trike. Now i gotta figure out how to mount my koso digital dyno meter. still need to figure out the photo bucket thing so I can post pictures.
Roy
|
|
|
|
Post by LUKE on Nov 2, 2010 23:25:29 GMT -6
|
|
..BAD TO THE BONE..
