Need Measurements for GY6 engine dimensions By ncredleg (Read 6,843 times)

[ncredleg]

:-[I need a link/pics that has the measurements from axle to case as well as between motor mounts. I thought it was on here , but I must not be wording my queries correctly. Thanks , Russ

[justguy1]

For which size engine?? Short case or Long case??

[ncredleg]

does anyone know the dimensions of the rear hub and brake assembly?

[ncredleg]

www.mopedarmy.com/photos/brand/22/6411/
Mine has more issues than the image , so not really interested in restoration.
Bought one recently.Motor is in good shape but has a funky rewind kick starter.50ccs and needs lots of work on the bike itself.
Planning on buying a 90cc and replacing all electrical and the front end due to damage.
Couple of options on the front end , I can go with a MTN Bike forkset and use the original Honda rim after having it relaced and using a new rear hub for the Express and having it relaced as well to fit the new engine .
I have a question that I need answered 1st though.

1) What is the diameter of the GY6 rear assembly with drum brakes?

Any opinions on this and please give me your thoughts on this swap.

[sprocket]

Do you mean on the engine? I would say about 6" maybe a little less
5-7/8

The rear wheel hub on the GY6 13" wheel is 6" O.D.

[Bashan]

Hey, whazzup? I was working on one of my engines this morning and thought I'd take a couple pics of the rear end since you were asking about it. Hey! Not THAT rear end! Anyway, I can take more measurements if you need them, just let me know. By outer rim I mean on the outside of the metal case, the red dots are on the inside of the case rim.

It's a long case if that matters. Rich

[ncredleg]

Thanks. That is for the 150cc? I am going to try and post some pics of the Honda I have.

[ncredleg]

That 150cc is too big to utilize the spoked rim from the Express.