Clinician
Currently Offline
Posts: 39
Likes: 0
Joined: Feb 22, 2011 18:23:32 GMT -6
|
Post by ringinding1 on Feb 28, 2011 21:17:37 GMT -6
HI everyone.I got a 2008 valo 50 i put a 50mm big bore kit,big vave head,performance cdi,racing clutch,2000rpm clutch springs,2000rpm torque spring,perfomance variator with 4g slider,a kn style aircleaner and performance exhaust and a 24 mil carb and intake.Was wondering were to start with jetting this scoot any advice would be appreciated thanks Attachments:
|
|
Scooter Doc
Currently Offline
Posts: 1,936
Likes: 7
Joined: Jun 18, 2010 22:25:14 GMT -6
|
Post by sprocket on Mar 1, 2011 17:45:07 GMT -6
It is all trial and error. I would start with a stock idle and 110 main.
Usually, the idle has little effect on the power range, so stay with stock and do just the
main jet. Changing them both you will get into be trouble...not knowing what effect each has
on the other...
|
|
Clinician
Currently Offline
Posts: 39
Likes: 0
Joined: Feb 22, 2011 18:23:32 GMT -6
|
Post by ringinding1 on Mar 1, 2011 18:01:58 GMT -6
thanks for the tip.im waiting on my cdi i got a bad one so they are sending me one
|
|
