seems like carb problem By tvnacman (Read 648 times)

[tvnacman]

Ok Wednesday my other scooter starting acting up , when i got home I could not get it to run . adjusted valves pulled the carb off did a good cleaning and it still won't run , gas flow is good , I pulled the intake off from the head and looked down it was wet , I cranked it a few times sprayed carb cleaner in it and the bike jumped .

I pulled the slide with the needle and rubber out , it will run if i hold the throdle . I tried a different diafram and it will not run .


what to do ?
I need help!!!!!

[Alleyoop]

Well if it fired when you sprayed in the intake you know it is not getting gas or to much and is being flooded. Take the bowl off and spray into the Pilot Jet and open the butterfly and see if SPray comes out of the little Pilot Jet hole passages. If it does come out then I would check out many turns the Air/Fuel mixture is turned out. Turn it in and then out 2 turns and try that.
Don't forget the Enricher is also feeding it fuel when cold so it could be flooding it as well.
Alleyoop

[tvnacman]

the pasages are clear , the rubber o ring has seen better days , besides a/f mixture what else will feed too much gas , the jet in there was running well (could after a few miles 2300 could it need to be reduced ) till the other day .

[Alleyoop]

How about a clogged Air Fliter that will cause it to suck in a lot of fuel and not air.
Alleyoop

[tvnacman]

alley I didn't even think of that , but I did put a !@#$%^ this thing


www.chinesepartswholesale.com/product_info.php?products_id=66996

after the trouble

[Alleyoop]

Tvnacman,
I found the parts for the Air/Fuel mixture screw O-Ring, Washer and Spring.
Alleyoop
www.harley-performance.com/cv-performance-parts.html

[tvnacman]

alley your the man