Scooter Doc
Currently Offline
Posts: 305
Likes: 0
Joined: Sept 5, 2010 16:49:48 GMT -6
|
Post by Bong on Mar 31, 2011 11:40:35 GMT -6
My little 50cc 4t dash light burnt out. The High beam and Blinker indicators still work But the speedo, Gas gages are dark. I know it's not a big deal but, I ride at night allot and it just bugs me. Does any one know how to replace these lights? I'm thinking about using LED replacements How do I gain access to the dash lights? Should I replace with the same bulb or LED's? Any help is appreciated Thanks!!! |
|
|
|
Post by Alleyoop on Mar 31, 2011 11:44:46 GMT -6
You just have to get in back of the panel and you will see they just pop out and you can replace them with LEDS.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 1,936
Likes: 7
Joined: Jun 18, 2010 22:25:14 GMT -6
|
Post by sprocket on Mar 31, 2011 14:27:09 GMT -6
Note that LEDs are polarized.. so if you put then in and they don't light turn them 180 deg in the socket...this gets lots of guys....
|
|
Scooter Doc
Currently Offline
Posts: 305
Likes: 0
Joined: Sept 5, 2010 16:49:48 GMT -6
|
Post by Bong on Mar 31, 2011 15:38:33 GMT -6
Thanks again guys!!!! Anyone know where to get either stock or LED Dash replacment lights?? Are LED's as bright during the day or should I just stick with the stock?
|
|
Scooter Doc
Currently Offline
Posts: 1,936
Likes: 7
Joined: Jun 18, 2010 22:25:14 GMT -6
|
Post by sprocket on Mar 31, 2011 15:46:40 GMT -6
These LEDs are about 5 times brighter than the stock bulb.... 194 501 T10 Inverted LED Wedge Bulbs -Wide angle type--- Scroll down this website about 90% to view.... $6.00 for 10 www.wardenjp.com/stores/194.htmlIt takes 3-4 weeks after you order they come snail mail from China I have ordered many....they are plug and play, but I like to wrap electrical tape between the holder and the bulbs, so they never vibrate loose... |
|
..BAD TO THE BONE..
