Clinician
Currently Offline
Posts: 2
Likes: 0
Joined: Jan 9, 2011 20:01:10 GMT -6
|
Post by lmason on Apr 4, 2011 14:06:29 GMT -6
Could someone post a wiring diagram of how to wire a relay to replace the blocking diode on a Roketa MC54-250 with the Helix clone motor?
|
|
Scooter Doc
Currently Offline
Vstar 650 Classic
Posts: 675
Likes: 3
Joined: Apr 24, 2010 19:43:21 GMT -6
|
Post by damin69 on Apr 4, 2011 14:39:36 GMT -6
I have all the plastic off of mine right now. I will try and take a picture of my Relay and the hook ups tonight.
Thanks,
Todd
By the way Welcome to the forum. :-)
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Apr 4, 2011 18:57:55 GMT -6
|
|
|
|
Post by Cruiser on Apr 4, 2011 19:22:39 GMT -6
In this case, the two wires on the blocking diode go to terminal 30 and 87 (no particular order), a wire from any ignition key switched circuit to 86 (relay poses very low load), and connect 86 to ground (any point on the frame). |
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Apr 4, 2011 19:44:14 GMT -6
|
|
Clinician
Currently Offline
Posts: 2
Likes: 0
Joined: Jan 9, 2011 20:01:10 GMT -6
|
Post by lmason on Apr 5, 2011 5:57:08 GMT -6
Thanks to all. Am new to scooters but am an old fart, have been thankful for all the posts and threads. They have given me insights as to what to look for and upgrade as I do my PDI. Have done all the lighting upgrades and am working on the cooling system and trying to track down the low charging electrical gremlins. Thanks again, Lynn
|
|
