Please help me find a case By one1 (Read 3,095 times)

[one1]

Can't argue with the price! $200 for this and it RUNS, but only so cheap because the seller and I looked forever to find a case and can't locate one. Please help. It's cracked at the kick start side. It's a 162fmj 150cc.

It pours oil out of course, but drives good so can't complain! If anyone knows what bike this is lemme know please. I can't find a name on it. I'm pretty certain it is a "Lifan 150".

[justbuggin]

i was gona say have it welded up but that is not a crack it is a big hole good luck finding a cover

[one1]

Well it is a crack, there's a cover over it. I might have to have it welded if they can weld that material. I would like to have a new case

[jct842]

What does it say on the title? With out a title you got a parts only bike. You could also run the vin number through one of the vin number decoder sites. It has to have a number some where on it unless it was removed and is hot.

[one1]

In my state it is a lost title bike. Have the notarized bill of sale for registration. Wife works at an auction house..... bought plenty of bikes, but this one doesn't have any identifying marks. Vin shows built in 2007 but no actual info

WMI / LRY
VDS / PCKL09
Make (Manufacturer): unknown
Model year: 2007
Country (Region): China (Asia)

www.purplewave.com/cgi-bin/mnlist.cgi?081202A/8911

Well it's nearly identical to a Baja Vision 250, and as it turns out this has the big 250 head on it so not a 149 like it says. Second time I have bought a chinese bike that lied about it's size.

[one1]

[sprocket]

Hardly a 150cc. Lifans are clearly marked with their name...

Probably a 250cc..no name manufacturer...some kind of motorcycle...

[jct842]

Hard to believe any state would give a lost title to a cycle with out a name. Some where along the line it had to have a name and model, and vin number in order to be titled in the first place. Its a good looking bike. I would think the vin could be traced to the last owner of record. The numbers you posted can't quite be a vin though, a vin has 17 letters and digits.

[terrdnf]

looks like a REBEL... i think dong fang mad them check with.... supersportz.com.... out in calif they might be able to help good luck... nice looking 250!
terry

[one1]

That was stupid easy to take out. 22 minutes flat, and put the shell back on.

[justbuggin]

the vin should be on the headtube where the stem from the forks goes though looks kinda like a Tank they made a bike like that good luck

[one1]

I have the VIN I don't have the manufacturer or model.

[raven]

Nice price.Clean too.Whats the kick start pedal like?Like something from a Sherman tank?I would leave it in the trunk if do get it running or it may happen again.Check the valves too.They could be bent.

[one1]

I had some shavings in the oil and knew the kick start was bad so I pulled the engine down primarily to remove the kick start assembly.

[cdoublejj]

If you can't find a new case you could possibly have someone who can weld pre heat it up pretty war/hot and try and weld it, hopefully it wouldn't warp (hence pre heating).