Certified Clinician
Currently Offline
Posts: 86
Likes: 0
Joined: Dec 8, 2011 8:30:23 GMT -6
|
Post by leenark on May 30, 2012 11:17:32 GMT -6
Hey fella's: After having my Magnum 300 for about 2 1/2 years I noticed a vibration in the right side rear view mirror. I pried it off and reset the mirror (glass) with silicone. It worked so well and took so much of the mirror vibration out I decided to do it to the left one as well. Might want to check your mirrors. The right one was very wobbly.
|
|
Senior Clinician
Currently Offline
Posts: 108
Likes: 0
Joined: Apr 26, 2012 6:16:41 GMT -6
|
Post by tierod on May 30, 2012 19:42:12 GMT -6
Mine is has a vibration also but it's the mirror shaft the part that screws into the handlebar. Does anyone know what I can do about that?
|
|
Scooter Doc
Currently Offline
Posts: 1,319
Likes: 5
Joined: Feb 17, 2011 19:36:47 GMT -6
|
Post by mike6736 on May 30, 2012 20:45:00 GMT -6
Lee you have not put after market mirrors on that yet??? Guess you will have to take it apart and see what is loose, when I cleaned my garage out about 2 weeks ago I threw a set of them in the trash didn't think anyone would have a use for them. The after market mirrors are longer and screw right were the originals were
Mike
|
|
Certified Clinician
Currently Offline
Posts: 86
Likes: 0
Joined: Dec 8, 2011 8:30:23 GMT -6
|
Post by leenark on Jun 1, 2012 13:33:46 GMT -6
Tierod: Not sure what you are discussing here. If it's just that the rod is not snug enough based on where your mirrors are positioned you can shim the mirror stud to tighten it up. If it's a vibration cause by too loose of a screw in stud you may not be able to do anything about that. Mike, I like the originals once I fixed them to where I wanted them to be versus what the factory gave me.
|
|
Clinician
Currently Offline
Posts: 31
Likes: 0
Joined: Jun 24, 2012 20:35:07 GMT -6
|
Post by roguesquid on Jul 2, 2012 20:14:48 GMT -6
Lee you have not put after market mirrors on that yet??? Guess you will have to take it apart and see what is loose, when I cleaned my garage out about 2 weeks ago I threw a set of them in the trash didn't think anyone would have a use for them. The after market mirrors are longer and screw right were the originals were Mike who offers these after market mirrors. I have an 2012 ice bear pst150-7t and man they vibrate like mad. I have stuff in the space ear hearing protection foaminess to keep the vibration to an minimum. And to the person who thinks they have to delete some of my posts. This is not necessary since they are not in violation of nay rules on this board. So if recommending an member do an write up to I dont know, help out someone else instead of I have an secret. |
|
Scooter Doc
Currently Offline
Posts: 1,319
Likes: 5
Joined: Feb 17, 2011 19:36:47 GMT -6
|
Post by mike6736 on Jul 2, 2012 20:32:11 GMT -6
Just take on off and go to any dealer and they will match the treads for ya
Mike
|
|
Senior Clinician
Currently Offline
"Lord, I seek your wisdom and guidance in making me the person my dogs think I am"
Posts: 166
Likes: 0
Joined: Oct 7, 2011 4:46:09 GMT -6
|
Post by ger42 on Jul 4, 2012 11:11:37 GMT -6
I replaced mine.
|
|
...
...
...
