Clinician
Currently Offline
Posts: 43
Likes: 1
Joined: Apr 23, 2010 16:15:15 GMT -6
|
Post by barry on Apr 1, 2013 1:08:32 GMT -6
;D Hi again everybody, Hoping everyone from Scootdawg's (RIP  ) will join us here. I want to change out all my lights on my Jonway 250cc 54B scoot for LED'S. I don't think I can get anything good for the headlights though. The headlights that came with the bike have burned out in 10 months, damn it. But for the turn singles and brake lights what size or type do I need..? And really, isn't there any alternative replacement for the damn headlight's..? Anyway, does ebay have what I need, the right type and sizes..? Someone said I could buy some at Autozone. Anyone know which ones..? model numbers..? thanks you guys barry  |
|
Clinician
Currently Offline
Posts: 6
Likes: 0
Joined: Jun 14, 2011 22:32:38 GMT -6
|
Post by nova1970 on Apr 2, 2013 13:35:56 GMT -6
Changed out all of mine on both scoots. Shopped around for mine on internet got some from T=MART and some from Amazon, (just search LED auto bulbs) turnsignals are 1156 amber, Tail/Brake is 1157, I used 11smd red. I got T-10 194 blue 5smd push in for dash lights and 3 5smd white for dash turn and high beam.
hope this is some help don.t come to this forum very often, frequent scooter rebel
NOVA1970
|
|
|
|
Post by ridecheap on Apr 2, 2013 20:05:43 GMT -6
|
|
|
|
Post by ridecheap on Apr 2, 2013 20:15:01 GMT -6
|
|
Clinician
Currently Offline
Posts: 43
Likes: 1
Joined: Apr 23, 2010 16:15:15 GMT -6
|
Post by barry on Apr 2, 2013 22:30:10 GMT -6
|
|
Clinician
Currently Offline
Posts: 43
Likes: 1
Joined: Apr 23, 2010 16:15:15 GMT -6
|
Post by barry on Apr 3, 2013 21:10:40 GMT -6
By the way, where did you guys order the regular 25w bulb's from..?
|
|
|
|
Post by ridecheap on Apr 4, 2013 11:58:54 GMT -6
The stock bulb is 25 but the 35 watt wont drain the battery at all I have the 35watt. I never had to buy 25watt.
|
|
Certified Clinician
Currently Offline
Posts: 66
Likes: 2
Joined: Apr 21, 2013 15:16:30 GMT -6
|
Post by taildrag on Apr 26, 2013 11:16:09 GMT -6
Salute:
2008 Roketa 257cc 54B Cypress. H4 head lights install...Do I just twist and pull out the orig. bulbs and put in the new H4s -or- do I have to cut off the orig. light scokets and splice in some new H4 sockets?
|
|
|
|
Post by Alleyoop on Apr 26, 2013 12:52:33 GMT -6
|
|
Certified Clinician
Currently Offline
Posts: 66
Likes: 2
Joined: Apr 21, 2013 15:16:30 GMT -6
|
Post by taildrag on Apr 26, 2013 16:03:15 GMT -6
Yep Alleyoop that was my next project but first I wanted to know about the ...head lights. I was told that led lights are not good for...head lights.
taildrag
|
|
Certified Clinician
Currently Offline
Posts: 66
Likes: 2
Joined: Apr 21, 2013 15:16:30 GMT -6
|
Post by taildrag on May 7, 2013 15:59:01 GMT -6
Well it's been a couple of weeks and no answer on my headlight queston. Anyone?
|
|
|
|
Post by Alleyoop on May 7, 2013 16:13:15 GMT -6
|
|
Certified Clinician
Currently Offline
Posts: 66
Likes: 2
Joined: Apr 21, 2013 15:16:30 GMT -6
|
Post by taildrag on May 8, 2013 10:37:48 GMT -6
Thank you Alleyoop. I think I will go that route.
|
|
Senior Clinician
Currently Offline
11,000 Miles and Counting...
Posts: 183
Likes: 3
Joined: Apr 27, 2010 14:00:36 GMT -6
|
Post by bhinch on May 9, 2013 3:52:07 GMT -6
I installed 35w..5000k...H4...9003 Hi/Lo Bi-Xenon with relay over two years ago and love them. Purchased off Ebay. Led's for the rear for turn and stop. Pretty much plug and play. There are tutorials on the scoot web sites that show how to install the HID's. Life is good....  |
|
Certified Clinician
Currently Offline
Posts: 66
Likes: 2
Joined: Apr 21, 2013 15:16:30 GMT -6
|
Post by taildrag on Jun 1, 2013 22:04:31 GMT -6
Can I use this(HID Bi-Xenon 9003 H4 Conversion KIT)for the headlights on my 2008 257cc 54 Cypress. The low beams(25W) both burnt out at the same time. Also are they legal to have on my scoot? Thanks.
|
|
) will join us here. I want to change out all my lights on my Jonway 250cc 54B scoot for LED'S. I don't think I can get anything good for the headlights though. The headlights that came with the bike have burned out in 10 months, damn it. But for the turn singles and brake lights what size or type do I need..? And really, isn't there any alternative replacement for the damn headlight's..?
..BAD TO THE BONE..
