Senior Clinician
Currently Offline
Posts: 222
Likes: 4
Joined: Mar 26, 2013 16:50:01 GMT -6
|
Post by jjoshua20213 on Apr 28, 2013 9:16:59 GMT -6
Durability wise. I just want it to last awhile, and be able to withstand a little heat
|
|
|
|
Post by Bashan on May 1, 2013 13:55:52 GMT -6
I just always use Gates when I replace the OEM belt. They will fit your criteria of heat tolerance and durability. They have two flavors, standard and premium, and I've never noticed much difference between them. There's also Bando and then the belts made with kevlar. I think Bandos are overpriced but some guys swear by them. I think kevlar for regular street riding is overkill IMO. Stick with Gates, they're well made and time tested. The time to replace your OEM with a Gates is when you lose 3mm in width. You'll also notice you'll lose top end as the ratio changes from the worn belt.
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on May 1, 2013 19:50:33 GMT -6
I have not heard any of it lately but a few years ago all kinds of people were having bad problems with kevlar belts. This was maybe 3 years ago. They were disintegrating fast. gates number one and bando second.
On the belt case, as far as heat goes loose the gasket and cut a few holes or a big hole for the heat to escape from near the clutch. loose the filter too. You will get some dust up in there but it won't be as bad as what heat does to rubber.
|
|
