Clinician
Currently Offline
Posts: 1
Likes: 0
Joined: May 3, 2013 16:25:00 GMT -6
|
my scooter
by: disciple99 - May 3, 2013 16:34:35 GMT -6
Post by disciple99 on May 3, 2013 16:34:35 GMT -6
wont start engine tries new parts
|
|
|
|
my scooter
by: Alleyoop - May 3, 2013 17:10:06 GMT -6
Post by Alleyoop on May 3, 2013 17:10:06 GMT -6
Need a little more information,
1. Won't CRANK( do you mean it turns over but will not start)?
2. Have you checked for SPARK
A. Use the OLD SPARK PLUG that you took out and take the BOOT CAP off the plug on the motor LEAVE THE PLUG THAT is in the motor in.
B. Stick the OLD PLUG into the BOOT CAP and hold the METAL Part of the PLUG on the MOTOR or VALVE COVER.
C. Make sure the KILLSWITCH is on the RUN POSITION and hit the start button and see if the SPARK PLUG IS SPARKING.
D. If it is Sparking then do the following:
Turn the FUEL RATIO MIXTURE SCREW clockwise until it stops do not force it just until it stops.
Then turn the FUEL RATIO MIXTURE SCREW counter clockwise 2 1/2 turns.
Try to start it.
Get back on the above.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 316
Likes: 0
Joined: Feb 28, 2011 12:11:27 GMT -6
|
my scooter
by: justbuggin - May 3, 2013 23:22:43 GMT -6
Post by justbuggin on May 3, 2013 23:22:43 GMT -6
how i check for spark is to get my nieghbor to hold the plug wire while i crank the motor over if he jumps and yells then i know i have spark (really have done this)
|
|
|
|
Post by LUKE on May 4, 2013 5:19:37 GMT -6
how i check for spark is to get my nieghbor to hold the plug wire while i crank the motor over if he jumps and yells then i know i have spark (really have done this) ....oh, i did that to my mother in law too... it sure works!! |
|
..BAD TO THE BONE..
