Senior Clinician
Currently Offline
Posts: 222
Likes: 4
Joined: Mar 26, 2013 16:50:01 GMT -6
|
Post by jjoshua20213 on May 24, 2013 18:46:12 GMT -6
|
|
|
|
Post by Alleyoop on May 24, 2013 18:58:07 GMT -6
From what some of the 50 guys say that CDI is garbage and they have taken them out.
Ones that have an advanced timing you will notice the rpms rise at idle, and it will give the motor a tade more power. Reason it is now firing sooner and not waiting until the piston is at Top Dead Center or near the top of its stroke.
Alleyoop
PM TVNACMAN he may have some and he tests them before shipping them out.
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on May 24, 2013 19:16:08 GMT -6
What weight rollers/sliders are in the variator ?
as Alley stated I do have a true advancing cdi , if you have a timing light you can see it advance at about 3000 rpm .
John
|
|
Senior Clinician
Currently Offline
Posts: 222
Likes: 4
Joined: Mar 26, 2013 16:50:01 GMT -6
|
Post by jjoshua20213 on May 24, 2013 23:48:25 GMT -6
At the moment I have (3) 4G slider weights and (3) 6.3G stock rollers
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on May 25, 2013 8:08:14 GMT -6
sounds about 5g , what rpm are you maxing out at ?
John
|
|
Senior Clinician
Currently Offline
Posts: 222
Likes: 4
Joined: Mar 26, 2013 16:50:01 GMT -6
|
Post by jjoshua20213 on May 28, 2013 16:11:38 GMT -6
No idea or even how to find out, lol
|
|
..BAD TO THE BONE..
