Scooter Doc
Currently Offline
Posts: 272
Likes: 1
Joined: May 5, 2012 14:05:15 GMT -6
|
Post by rob63 on May 29, 2013 11:28:15 GMT -6
I`m building a custom project in work and have seen a nifty looking LED tailight on fleabay. Unfortunately I have no experience with LED lights so I`m wondering if they can be wired in just like a normal light or do I need something else like a relay ? The bikes a 50cc ped with a 12v system and will be wired to run without a battery. Any info from those in the know would be much appreciated.  |
|
Scooter Doc
Currently Offline
Posts: 272
Likes: 1
Joined: May 5, 2012 14:05:15 GMT -6
|
Post by rob63 on May 29, 2013 15:16:36 GMT -6
Did a bit more probing and found a few articles on the net. Apparently I can wire the lamp in as per a normal lamp, no extras needed. |
|
|
|
Post by Bashan on May 30, 2013 15:18:04 GMT -6
I was sick of SUVs running up on me on death RTE.280 so I bought a LED light from Wal-Mart that's designed for a camper. I wired it off of the hot wires to the tail light and brake light and grounded them to the frame. It has really helped keep drivers off of my arse:
If somebody is coming up on me too fast I lightly pull the brake handle enough to get the light to come on:
It ain't pretty but it has sure helped keep the boneheads at bay.
|
|
